Ultimaker S5 Dual Extrusion Large-Format 3D Printer Ultimaker S5 Dual Extrusion Large-Format 3D Printer

$ 5,995.00

-
+
$ 5,995.00
Add to wishlist


 

 

 

Ultimaker S5

Powerful, reliable, versatile 3D printing

Discover the easy-to-use desktop 3D printer with a large build volume that delivers accurate, industrial-grade parts, time and again. With simple setup, high up time, and reliable dual extrusion, Ultimaker S5 is the complete professional 3D printing solution.

 

 



  

Features on Demand

Workspace Dimensions

330 X 240 X 300 mm3

Resolution

Down to 20 microns


 

Printed on the Ultimaker S5

Optimized materials: Tough PLA, Nylon, PLA, ABS, CPE, PVA, PC, TPU, 95, PP and Breakaway

Think big, print bigger

With its bigger build volume, the Ultimaker S5 is designed for a reliable 3D printing experience at scale.
For large, technical prints, Tough PLA material offers toughness similar to ABS with the simplicity of PLA.

Optimized materials

Ultimaker materials are extensively tested to give the best results on the Ultimaker S5.
And Ultimaker Cura software comes with preconfigured profiles, so you don’t need to spend time on complex slicing settings.

Limitless possibilities

3D print everything from quick prototypes to complex, technical parts with Ultimaker’s range of build and support materials.
And with an open filament system, you can also choose a custom material solution.


 

Features

 

 

 

 

Enhanced reliability

Active bed leveling ensures a perfect first layer, a closed front controls airflow, and a filament flow sensor will pause your print and notify you if you run out of material. Trust the S5 to do its job while you do yours.

 

 

 


 

 

Bigger build volume

A build volume of 330 x 240 x 300 mm (13 x 9.4 x 11.8 inches), combined with Ultimaker’s reliable dual extrusion and water-soluble support, gives even more freedom to realize your designs or print multiple parts in one go so you can meet demand with maximum efficiency, while fitting comfortably on your desk.

 

 

 

 

Fast setup, high up time

With Ultimaker’s unique print core design, swap nozzles in seconds to switch between build and support materials, or choose from 0.8, 0.4, or 0.25 mm print cores for fast or detailed prints.

 

 

 

 Award-winning touchscreen interface
Winner of a 2019 iF Design Award, the touchscreen interface simplifies every action with the Ultimaker S5. Step-by-step setup, navigation, and maintenance remove the need for training and deliver a hassle-free, intuitive 3D printing experience.

 

 

 

 

 

 

 

 

 

Designed to connect

The Ultimaker S5 auto-detects material and print core configuration, while over-the-air firmware upgrades make adding the latest features simple. Print over Wi-Fi, Ethernet, or from a USB stick, and monitor progress via the built-in camera.

 

3D printers that simply work
Our award-winning 3D printers are robust, reliable, and easy to use. They deliver quality parts time and again. Certified to run 24/7, they allow you to achieve the results you need more quickly and easily.

Software ready for Industry 4.0
Trusted by millions of users across 14 languages, Ultimaker Cura slices your model and integrates with any workflow through Marketplace plugins. Then scale production and digital distribution with Ultimaker Cloud.

Material choice like never before
Ultimaker offers the widest material choice on the market. Through our Material Alliance, choose the perfect filament for your application – from advanced polymers to carbon fiber composites.

Support dedicated to your success
Wherever you are in the world, Ultimaker support is close by. Our global network of service partners offer professional installation, training, and maintenance in your language and time zone.​

 

Explore Ultimaker S5 

 

 

 

Technical Specifications

 

Printing

Mechanical

Software & Electrical

Printing Technology

FDM (Fused Deposition Modelling)

Build Volume

330 x 240 x 300 mm

Layer Resolution

0.25 mm nozzle: 150 - 60 micron

0.4 mm nozzle: 200 - 20 micron

0.8 mm nozzle: 600 - 20 micron

Build speed

<24 mm3/S

Build plate temperature

20 - 140 °C

Nozzle Diameter

0.25 mm, 0.4 mm, 0.8 mm

Nozzle Temperature

180 - 280 °C

Dimensions

495 x 457 x 520 mm

Material recognition

Auto-recognition with NFC scanner

Operating sound

50 dBA

Product Weight

20.6 kg

Software

Ultimaker Cura

File Type

Ultimaker Cura :STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG

Printable formats: G, GCODE, GCODE.gz, UPF

Operating Systems

Windows

Mac OS X

Connectivity

Wi-Fi, LAN, USB port

Language Support

English,Dutch, French, German, Italian, Japanese, Korean, Portugese, Russian, Spanish, Simplified Chinese

AC Input

100-240 V, 50-60 Hz, 221 W

 


 

 

 

Ultimaker S5

Powerful, reliable, versatile 3D printing

Discover the easy-to-use desktop 3D printer with a large build volume that delivers accurate, industrial-grade parts, time and again. With simple setup, high up time, and reliable dual extrusion, Ultimaker S5 is the complete professional 3D printing solution.

 

 



  

Features on Demand

Workspace Dimensions

330 X 240 X 300 mm3

Resolution

Down to 20 microns


 

Printed on the Ultimaker S5

Optimized materials: Tough PLA, Nylon, PLA, ABS, CPE, PVA, PC, TPU, 95, PP and Breakaway

Think big, print bigger

With its bigger build volume, the Ultimaker S5 is designed for a reliable 3D printing experience at scale.
For large, technical prints, Tough PLA material offers toughness similar to ABS with the simplicity of PLA.

Optimized materials

Ultimaker materials are extensively tested to give the best results on the Ultimaker S5.
And Ultimaker Cura software comes with preconfigured profiles, so you don’t need to spend time on complex slicing settings.

Limitless possibilities

3D print everything from quick prototypes to complex, technical parts with Ultimaker’s range of build and support materials.
And with an open filament system, you can also choose a custom material solution.


 

Features

 

 

 

 

Enhanced reliability

Active bed leveling ensures a perfect first layer, a closed front controls airflow, and a filament flow sensor will pause your print and notify you if you run out of material. Trust the S5 to do its job while you do yours.

 

 

 


 

 

Bigger build volume

A build volume of 330 x 240 x 300 mm (13 x 9.4 x 11.8 inches), combined with Ultimaker’s reliable dual extrusion and water-soluble support, gives even more freedom to realize your designs or print multiple parts in one go so you can meet demand with maximum efficiency, while fitting comfortably on your desk.

 

 

 

 

Fast setup, high up time

With Ultimaker’s unique print core design, swap nozzles in seconds to switch between build and support materials, or choose from 0.8, 0.4, or 0.25 mm print cores for fast or detailed prints.

 

 

 

 Award-winning touchscreen interface
Winner of a 2019 iF Design Award, the touchscreen interface simplifies every action with the Ultimaker S5. Step-by-step setup, navigation, and maintenance remove the need for training and deliver a hassle-free, intuitive 3D printing experience.

 

 

 

 

 

 

 

 

 

Designed to connect

The Ultimaker S5 auto-detects material and print core configuration, while over-the-air firmware upgrades make adding the latest features simple. Print over Wi-Fi, Ethernet, or from a USB stick, and monitor progress via the built-in camera.

 

3D printers that simply work
Our award-winning 3D printers are robust, reliable, and easy to use. They deliver quality parts time and again. Certified to run 24/7, they allow you to achieve the results you need more quickly and easily.

Software ready for Industry 4.0
Trusted by millions of users across 14 languages, Ultimaker Cura slices your model and integrates with any workflow through Marketplace plugins. Then scale production and digital distribution with Ultimaker Cloud.

Material choice like never before
Ultimaker offers the widest material choice on the market. Through our Material Alliance, choose the perfect filament for your application – from advanced polymers to carbon fiber composites.

Support dedicated to your success
Wherever you are in the world, Ultimaker support is close by. Our global network of service partners offer professional installation, training, and maintenance in your language and time zone.​

 

Explore Ultimaker S5 

 

 

 

Technical Specifications

 

Printing

Mechanical

Software & Electrical

Printing Technology

FDM (Fused Deposition Modelling)

Build Volume

330 x 240 x 300 mm

Layer Resolution

0.25 mm nozzle: 150 - 60 micron

0.4 mm nozzle: 200 - 20 micron

0.8 mm nozzle: 600 - 20 micron

Build speed

<24 mm3/S

Build plate temperature

20 - 140 °C

Nozzle Diameter

0.25 mm, 0.4 mm, 0.8 mm

Nozzle Temperature

180 - 280 °C

Dimensions

495 x 457 x 520 mm

Material recognition

Auto-recognition with NFC scanner

Operating sound

50 dBA

Product Weight

20.6 kg

Software

Ultimaker Cura

File Type

Ultimaker Cura :STL, OBJ, X3D, 3MF, BMP, GIF, JPG, PNG

Printable formats: G, GCODE, GCODE.gz, UPF

Operating Systems

Windows

Mac OS X

Connectivity

Wi-Fi, LAN, USB port

Language Support

English,Dutch, French, German, Italian, Japanese, Korean, Portugese, Russian, Spanish, Simplified Chinese

AC Input

100-240 V, 50-60 Hz, 221 W

 

Recently Viewed Products Recently Viewed Products