ULTIMAKER MATERIAL STARTER BUNDLE 12 (SINGLE EXTRUSION) ULTIMAKER MATERIAL STARTER BUNDLE 12 (SINGLE EXTRUSION)

$ 599.40 $ 539.00
PLA OR TOUGH PLA
-
+
$ 539.00
Add to wishlist

The Ultimaker Material Starter Bundle 12 (Single Extrusion) includes 12 spools of Ultimaker NFC PLA 2.85mm (750g) or Tough PLA (750g), suitable for any model of Ultimaker printer (or any other 3D printers that accept 2.85mm filament).

Before adding to your cart, select the filament option (PLA or Tough PLA). Both materials are easy to print. PLA is available in a wider range of colors but isn't as strong as Tough PLA. Tough PLA offers the toughness of ABS with the safety and ease of use found in regular PLA.

The following is a list of the colors and quantities you will receive, depending on your choice of PLA or Tough PLA.

PLA

- (2) Ultimaker NFC PLA 2.85mm White
- (1) Ultimaker NFC PLA 2.85mm Black
- (1) Ultimaker NFC PLA 2.85mm Magenta
- (1) Ultimaker NFC PLA 2.85mm Red
- (1) Ultimaker NFC PLA 2.85mm Orange
- (1) Ultimaker NFC PLA 2.85mm Yellow
- (1) Ultimaker NFC PLA 2.85mm Blue
- (1) Ultimaker NFC PLA 2.85mm Green
- (1) Ultimaker NFC PLA 2.85mm Silver Metallic
- (1) Ultimaker NFC PLA 2.85mm Transparent
- (1) Ultimaker NFC PLA 2.85mm Pearl White

Tough PLA

- (4) Ultimaker NFC Tough PLA 2.85mm White
- (4) Ultimaker NFC Tough PLA 2.85mm Black
- (4) Ultimaker NFC Tough PLA 2.85mm Red
- (4) Ultimaker NFC Tough PLA 2.85mm Green


IMPORTANT NOTE ON COMPATIBILITY:
Automatic material detection with this filament will only work when used with the newer Ultimaker 3 or Ultimaker S5 printers.


ULTIMAKER MATERIAL STARTER BUNDLE 12 (SINGLE EXTUSION)


The new Ultimaker NFC 2.85 mm filament is 100% compatible with Ultimaker 2+, Ultimaker 2 Extended+, Ultimaker 2 Go and the Ultimaker Original+ Kit. The previous generation of non-NFC Ultimaker filament is 100% compatible with the Ultimaker 3 and Ultimaker S5.

The difference is that you will only get the benefit of automatic material detection when using the Ultimaker NFC 2.85 mm filament exclusively with the newer Ultimaker 3 or Ultimaker S5 printers

 

The Ultimaker Material Starter Bundle 12 (Single Extrusion) includes 12 spools of Ultimaker NFC PLA 2.85mm (750g) or Tough PLA (750g), suitable for any model of Ultimaker printer (or any other 3D printers that accept 2.85mm filament).

Before adding to your cart, select the filament option (PLA or Tough PLA). Both materials are easy to print. PLA is available in a wider range of colors but isn't as strong as Tough PLA. Tough PLA offers the toughness of ABS with the safety and ease of use found in regular PLA.

The following is a list of the colors and quantities you will receive, depending on your choice of PLA or Tough PLA.

PLA

- (2) Ultimaker NFC PLA 2.85mm White
- (1) Ultimaker NFC PLA 2.85mm Black
- (1) Ultimaker NFC PLA 2.85mm Magenta
- (1) Ultimaker NFC PLA 2.85mm Red
- (1) Ultimaker NFC PLA 2.85mm Orange
- (1) Ultimaker NFC PLA 2.85mm Yellow
- (1) Ultimaker NFC PLA 2.85mm Blue
- (1) Ultimaker NFC PLA 2.85mm Green
- (1) Ultimaker NFC PLA 2.85mm Silver Metallic
- (1) Ultimaker NFC PLA 2.85mm Transparent
- (1) Ultimaker NFC PLA 2.85mm Pearl White

Tough PLA

- (4) Ultimaker NFC Tough PLA 2.85mm White
- (4) Ultimaker NFC Tough PLA 2.85mm Black
- (4) Ultimaker NFC Tough PLA 2.85mm Red
- (4) Ultimaker NFC Tough PLA 2.85mm Green


IMPORTANT NOTE ON COMPATIBILITY:
Automatic material detection with this filament will only work when used with the newer Ultimaker 3 or Ultimaker S5 printers.


ULTIMAKER MATERIAL STARTER BUNDLE 12 (SINGLE EXTUSION)


The new Ultimaker NFC 2.85 mm filament is 100% compatible with Ultimaker 2+, Ultimaker 2 Extended+, Ultimaker 2 Go and the Ultimaker Original+ Kit. The previous generation of non-NFC Ultimaker filament is 100% compatible with the Ultimaker 3 and Ultimaker S5.

The difference is that you will only get the benefit of automatic material detection when using the Ultimaker NFC 2.85 mm filament exclusively with the newer Ultimaker 3 or Ultimaker S5 printers

 

Recently Viewed Products Recently Viewed Products