Slice Engineering
$ 29.99
Slice Engineering Nozzle Torque Wrench: 1.5 Nm Specifically designed for changing nozzles 1.5 Nm torque provides correct seal to prevent leaking plastic Perfect tool for one-handed nozzle change when paired with The Mosquito Hotend...
From $ 15.99
Slice Engineering 50W Heater Cartridge Pump more power into your 3D printer with a high power density 50W heater cartridge. 22 mm long Diameter sized to fit into a 6 mm H7 tolerance hole...
$ 6.99
Slice Engineering Hotend Cooling Fan High quality 25 mm box fan with dual Japanese bearings Molex Micro-Fit 3.0 connector Mounts directly to the Mosquito Hotend, Mosquito Magnum, or Copperhead with included hardware Available in...
$ 9.99
Slice Engineering Boron Nitride Paste - 5cc Thermal paste for improving conduction Acts as a release agent Unlike anti-seize compounds, Boron Nitride is not electrically conductive , which eliminates the risk of shorting out...
$ 29.99
Slice Engineering RTD Pt1000 Pt1000 Resistance Temperature Detector (RTD) uses a platinum resistor for the ultimate in temperature sensing performance. Works with Duet 3 and other high amperage boards out of the box. Perfect...
$ 5.99
Hardware for mounting the hot block to the heat sink in the Mosquito or Mosquito Magnum hotends Thin walled stand-off tubes reduce conductive heat flow proximally from the hot block Made in USA Includes:...
$ 12.99
Slice Engineering Groove Mount Adapter Mounts directly to the top of The Mosquito Hotend/Mosquito Magnum heat sink Simple to install and configure Machined aluminum component Includes: Groove mount adapter Mounting screws Manufacturer's Part Number:...
$ 14.99
Slice Engineering Plastic Repellent Paint Got a sticky nozzle? Sick of plastic sticking to it all the time? Plastic Repellent Paint by Slice Engineering is the solution for you! Plastic Repellent Paint™ is a...
$ 174.99
Check out the newly updated Mosquito® Magnum! Now with a coated heat break! The Mosquito® Magnum prints upwards of 30 mm^3/sec A thermal insulator protects the extended melt zone from the effects of active...
$ 149.99
Slice Engineering Mosquito® Hotend Superior Heat Break Performance Eliminate Heat Creep and reduce jamming Improve printing resolution Improve capability with high temp materials Lower retraction improves printing speed RIGID STRUCTURE One-handed Nozzle Change™ allows...
$ 29.99
Replacement heat break insulator for the Mosquito Magnum™ hotend Composite construction Insulates Mosquito Magnum™ heat break to help extend the plastic melt zone and increase printing speeds Precision CNC machined Made in USA Manufacturer's...
$ 79.99
Slice Engineering Mosquito® Base Liquid Heat Sink for Mosquito® Liquid The liquid cooling block is precision machined out of a corrosion resistant bronze alloy that allows for use with most commercially available coolants Made...
$ 2.99
Slice Engineering Extension Cable for Fan or Thermistor 1 m long extension cable Molex Micro-Fit 3.0 connector (female end) JSTRE-02 connector (male end) Manufacturer's Part Number: P-ECF-AC-0004
$ 4.99
Slice Engineering Hotend Wrench Set Hex keys for Mosquito™ & Mosquito™ Magnum Contains 3 Allen key wrenches 2 mm 1.5 mm 1.3 mm Manufacturer's Part Number: P-HWS-RE-0032
$ 289.99
Bondtech - Mosquito Magnum+ Air-cooled 1.75mm Overview: The Mosquito Magnum+ Liquid is the High Flow Mosquito hotend for industrial and high flow applications. Mosquito Magnum+ supports up to 2 heater cartridges and 2 temperature...
$ 174.99
Mosquito Magnum Hotend Slice Engineering released a brand new version of the Mosquito Magnum! This new versions include a revised heat break and heat sink with cool new features. The new heat break has...
$ 24.99
Slice Engineering GammaMaster Nozzle for RepRap The GammaMaster® Nozzle is the next evolution in nozzle technology, forged from the latest advancements in metallurgy and surface preparation technology. For too long, you have had to...
$ 9.99
Slice Engineering Copperhead™ Silicone Boot Fits Copperhead Hotends with Copperhead Hot Blocks. At long last, there is an official silicone boot for the Copperhead. And yes, it is a boot, not a sock. Socks...
From $ 74.99
Slice Engineering Mosquito® Base Conduct Copper heat sink for Mosquito® Conduct and Mosquito® Magnum+ Conduct The Base is precision machined out of a tough bronze alloy that allows for numerous installation and removal cycles...
$ 179.99
Slice Engineering Mosquito Conduct Hotend 1.75 So this hotend is a little bonkers. It's tiny, lightweight, and doesn't use a fan! We eliminated the fan by conducting heat to a small copper heat sink...
$ 44.99
Slice Engineering Copperhead™ Heat Sink Aircraft-grade aluminum heat sink Fits the Standard Copperhead™ Heat Break Two variants available SEMI™ mount Groovemount Manufacturer's Part Number: Groove Mount - G2: P-CHS-RE-0351-GRV Screw Mount - G2: P-CHS-RE-0352-SEM...
$ 24.99
Slice Engineering Copperhead™ Hot Block Nickel-plated for superior longevity and reduced emissivity Copper alloy base material Distinctive laser marking Convenient wrench flats to simplify changing nozzles The Copperhead™ Hot Block is available in one...
$ 39.99
Slice Engineering Mosquito® Heat Break - Conduction Need to replace your heat break? We’ve got you covered, with the Bimetallic Heat Break™ from Slice Engineering. Composite, bi-metallic construction makes this the thinnest, highest performing...
From $ 34.99
Slice Engineering Mosquito® Heat Break Need to replace your heat break? We’ve got you covered, with the Bimetallic Heat Break™ from Slice Engineering. Composite, bi-metallic construction makes this the thinnest, highest performing heat break...
$ 59.99
Replacement hot block for the standard Mosquito™ and Mosquito Magnum™ hotends High-grade copper construction Plastic-repellent coating Precision CNC machined Made in USA Manufacturer's Part Number: P-MHB-RE-0018
From $ 34.99
Slice Engineering Mosquito® Heat Sink Aircraft grade aluminum heat sink Fits Mosquito™ or Mosquito™ Magnum Mounting point for 25 mm cooling fan Contains built in anti-rotation features for mating with Bondtech BMG-M Made in...
From $ 29.99
Slice Engineering Eisele Elbow Fittings High-quality push-in fittings for closed coolant applications from the Eisele LIQUIDLINE series. Designed to be a perfect fit for the Mosquito™ Liquid series hotends. Dezincification-resistant brass was especially designed...
$ 1.99
Slice Engineering Mounting Screws for Plastic Adapters These special self-tapping steel screws have a cutting profile built into the thread angle so they require less driving torque and reduce the risk of cracking thin...
$ 4.99
Mounting hardware for all Slice Engineering Hotends Includes: Set (2x) of M2.5x10 socket head cap screws and washers for attaching Mosquito Hotend heat sink to threaded adapters Set (2x) of M2.5x6 socket head cap...