In the dynamic world of 3D printing, innovation never stops. Bambu Lab, a renowned name in the industry, has recently unveiled a game-changing duo, the A1 Mini 3D Printer and the Multicolor AMS Lite. Let's delve into the details.
- AMS lite supported, up to 4-color printing.
- Pre-assembled, pre-tuned, pre-squared, plug-n-play.
- Active Flow Rate Compensation (Auto-calibrated Pressure Advance), precise extrusion at every corner.
- Active Motor Noise Cancellation, under 48dB in silent mode.
- Filament tangle and runout monitoring, all-rounded ensuring filament feed.
- Full-metal linear rails and rigid frame, robust quality from day one to beyond.
Active Flow Rate Compensation: The A1 Mini redefines flow control in 3D printing by incorporating a high-resolution, high-frequency eddy current sensor to monitor nozzle pressure. Bambu Lab's advanced algorithm dynamically adjusts the flow rate based on these measurements, ensuring precise extrusion.
Active Flow Rate Compensation: The A1 Mini transforms flow control in 3D printing through the integration of a cutting-edge, high-resolution eddy current sensor that continually monitors nozzle pressure. Our sophisticated algorithm adapts the flow rate in real-time, guaranteeing exact extrusion.
Plug-N-Play: The A1 Mini arrives at your doorstep fully assembled, calibrated, and squared to perfection. Setting it up for your inaugural print is a breeze and typically takes just 20 minutes.
Active Motor Noise Cancelling: The A1 Mini can fine-tune parameters to accommodate slight variations among individual drive motors, effectively mitigating undesirable motor noise.
Bed Slinger, with CoreXY Speed and Quality (High-Speed Precision): The A1 Mini boasts a robust construction with full-metal rails, a rigid frame, nozzle pressure sensor, accelerometers, a powerful MCU, and, most importantly, an advanced motion control system that seamlessly combines these elements to produce a high-quality 14-minute benchy print right out of the box, adhering to all speed benchy rules, all without the need for specialized filaments.
Sync with Bambu Studio and Bambu Handy: Take charge of your printer from afar by using Bambu Studio or Bambu Handy for remote control and monitoring. Additionally, utilize the built-in camera to capture captivating timelapse videos.
A1 Mini Tech Specs
- Build Volume (W*D*H): 180*180*180 mm³
- Hot End: All-Metal
- Nozzle: Stainless Steel
- Max Hot End Temperature: 300 °C
- Nozzle Diameter:M 0.4 mm (Included), 0.2 mm, 0.6 mm, 0.8 mm
- Build Plate: Bambu Textured PEI Plate (Included), Bambu Smooth PEI Plate
- Max Build Plate Temperature: 80°C
- Max Speed of Tool Head: 500mm/s
- Max Acceleration of Tool Head: 10m/s²
- PLA, PETG, TPU, PVA: Ideal
- ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer: Not Recommended
- Monitoring Camera: Low Framerate Camera (Up to 1080P) - Timelapse Supported
- Filament Run Out Sensor: Yes
- Filament Odometry: Yes
- Power Loss Recover: Yes
- Filament Tangle Sensor: Yes
If you're looking for something a little larger that can handle multiple materials including carbon fiber, you should check out the A1 Mini's beefier and older brother, the X1 Carbon Combo 3D Printer.