Zortrax Cleaning Station

$ 3,790.00

-
+
$ 3,790.00

Zortrax Cleaning Station

Zortrax Cleaning Station is a professional post-processing device designed to remove uncured resin from the surfaces of printed parts. The device uses an impeller-based system to clean 3D prints, which reduces the risk of damaging details.

  • 300 x 210 x 270 mm workspace
  • tank capacity 18 l
  • two mechanical filters: polypropylene cartridge (1 micron) and stainless mesh cartridge with UV lighting (150 microns)
  • excessive cleaning fluid level sensor
  • flow meter preventing operation without the cleaning fluid in the system
high volume resin wash station

Compatibility with all resin 3D printers

The Zortrax Cleaning Station performs well with models printed using all major resin 3D printing technologies like UV LCD, SLA, and DLP. The high volume tank can clean relatively large models. Moreover, the device offers full functionality with all resin 3D printers on the market.

two stage resin wash station

Two supported cleaning agents

Isopropyl alcohol (IPA) is the most popular cleaning agent used in post-processing of resin 3D printed models and Zortrax Cleaning Station is designed to support it. The cleaning station is also compatible with glycol-based cleaning fluids in order to support two stage cleaning. The first stage is done using glycol-based agents and the second is done with standard IPA.

fast resin wash station

More efficient rotor cleaning

Zortrax Cleaning Station uses a rotor with adjustable speed to circulate cleaning fluid. This approach is more delicate and does not damage intricate parts, compared to ultrasonic cleaners. The cleaning process takes roughly 5 minutes and is fully automated. Once it is done, the top cover opens up and the models are lifted out of the tank for retrieval.

IPA wash station

IPA filtering system

IPA cleaning fluid is circulated through a filtering system that collects the uncured resin. This way the IPA can be safely reused in multiple cleaning session. Lifespan of filters depends on the geometry and size of the cleaned models. It is recommended to check the filters' condition periodically and replace them when they are clogged.

Specifications

Device

Working area dimensions 300 x 210 x 270 mm (11.8 x 8.27 x 10.6 in)
Tank capacity 18 l
Filters polypropylene cartridge (1 micron) and stainless mesh cartridge with UV lighting (150 microns)
Display/control panel touch control panel
Security excessive cleaning fluid level sensor and flow meter preventing operation without the cleaning fluid in the system

Weight and physical dimensions

Device (W x D x H) 460 x 460 x 490 mm (18.1 x 18.1 x 19.3 in)
Weight - without IPA 40 kg (88.2 lb)
Weight - with IPA (full tank) around 60 kg (132 lb)

Electrical

AC Input 100 - 240 V AC 4 A 50/60 Hz
Maximum power consumption 48 W

In the box

Zortrax Cleaning Station, a metal basket for 3D prints’ cleaning, a holder for attaching the Inkspire 2 platform, Starter Kit

Additional information

Each delivered device may have worked up to 20 hours during the quality control test.

SID: MDM40N9J


Fill out my online form.

Recently Viewed Products