Phrozen Aqua Green Model Resin

$ 39.20

$ 39.20
Add to wishlist

Phrozen Aqua Green Model Resin

Phrozen Aqua-Green is developed for low shrinkage and high precision printing. Its low warp rate & dimensional stability are especially good for precise parts. This resin is great for models and product prototyping.

Phrozen Aqua Green Model Resin

Additional features:

- Low viscosity: Easy printing and post production
- Low odor: Minimal smells
- Fast printing: Customized for 405nm LCD printer. Cure time per layer: 7 sec on Shuffle & 1.5 sec on Sonic (50µm).


Weight: 500g or 1KG per bottle
XY Resolution: 50 µm
Recommended Layer Height: 30-100 um
Way to Rinse:  Clean with alcohol spray with air gun. DO NOT immerse model into alcohol for long time.

Key Performance:
Viscosity: 125 cps
Proportion: 1.1
Tg:80 °C
Elongation: 21 %
Break value: 24 MPa
Surface hardness: Shore 86D
I-Zod Impact:1.81 KJ/m2

- Shuffle 2019
- Shuffle 4K
- Shuffle Lite
- Sonic
- Sonic Mini
- Sonic
- Transform

Use and preserve resins at room temperature, in dark and ventilated areas.
Shake well before use.
When print finishes, keep used resins in closed & opaque bottle. Avoid mixing used resin with fresh resin.
Keep resin away from children and away from direct sunlight exposure.
Wear gloves and masks during operation of resins. Wash with plenty of water if you get direct skin contact or eye contact with resins.
DO NOT dump unused resin. Please cure it and treat it as general plastic waste.

Recently Viewed Products

Liquid error: Could not find asset snippets/zopim.liquid