Phrozen ONYX Impact Plus Resin 1KG

Phrozen ONYX Impact Plus Resin

5x Impact Endurance Power

Partnered with Loctite ®, Phrozen ONYX Impact Plus offers 5x impact-resistant power for heavy-duty daily projects and engineering applications.

Benefits:

• Shockproof & Unbreakable: Ultra-high impact resistance to withstand even the most vigorous attacks continuously.
• Incredibly Strong Weight Endurance: With extreme weight endurance power, objects printed with Phrozen ONYX Impact Plus can carry loads of more than 150kg.
• Bendable and Resilient Material: Highly durable and resilient, Phrozen Onyx Impact Plus will maintain its integrity to always return to its original shape.

Specs:

• Weight: 1kg per bottle
• Surface Hardness: 72 Shore D
• Tensile Stress at Break: 37 MPa
• Young’s Modulus: 1175 ± 47 MPa
• Elongation at Break: 98 %
• Notched Izod Impact: 145.00 J/m
• Shore D Hardness (5s): 72 D
• Solid Density: 1.15 g/cm3
• Liquid Density: 1.05 g/cm3
• HDT at 0.45 MPa: 52 °C

*All specifications have been tested in a laboratory. Please note that certain specifications may be subject to change without prior notice.

*The Shore D Hardness data for this resin is measured with an exposure time of 5 seconds.

Precautions:

• To clean, spray with alcohol and dry it with an air compression gun. DO NOT immerse the model in alcohol for an extended period.
• Use and preserve resins at room temperature in dark and ventilated conditions.
• Shake well before each use.
• After printing, please keep used resins in a closed & opaque bottle. Avoid mixing used resin with a new resin.
• Keep resin away from kids and direct sunlight exposure.
• Wear gloves and masks when handling resins. Wash with plenty of water in case of direct contact with skin or eyes.
• DO NOT dump resin directly. Please cure and treat it as general plastic garbage.
• After receiving your Phrozen resins, we strongly recommend that you finish them as soon as possible since unopened resins only have a shelf life of one year.
• Post-processing note: For best results, please allow your print to dry for 40 to 60 minutes after washing, then post-cure for 30 minutes on each side.
• Minor color differences between the printed parts and website pictures do not impact the final performances.