KIMYA ABS ESD / Electrostatic Discharge Safe Filament - 500 grams
The Kimya ABS-ESD 3D filament belongs to the styrenic polymer family. ABS-ESD is an Acrylonitrile Butadiene Styrene to which an additive has been added to give it Electro Static Discharge properties: this material protects against electrostatic discharge. It also provides good impact resistance. It is a lightweight and rigid material that is also easy to print. It is ideal for applications requiring protection against electrostatic discharge. The Kimya ABS-ESD 3D filament has the following properties:
- Easy to print
- Protects against electrical discharge
- Complies with the RoHS and REACH standards
- Product Dimensions: 20.7 × 20.5 × 6 cm; 0.8 kg
FILAMENT PROPERTIES
| PROPERTIES |
TEST METHODS |
VALUES |
| Diameter |
INS-6712 |
1.75 ± 0.1 mm
2.85 ± 0.1 mm |
| Density |
ISO 1183-1 |
1.03 g/cm3 |
| Moisture rate |
INS-6711 |
< 1 % |
| Melt flow index (MFI) |
ISO 1133-1 (@220°C – 10 kg) |
15 - 20 g/10min |
| Glass transition temperature (Tg) |
ISO 11357-1 DSC (10°C/min - 20-300°C) |
107 °C |
PRINT PARAMETERS AND SPECIMENS DIMENSIONS
| PRINTING DIRECTION |
XY |
| Printing Speed |
40 mm/s |
| Infill |
100% - rectilinear |
| Infill Angle |
45°/-45° |
| Nozzle Temperature |
260°C |
| Bed T° |
100°C |
PRINTED SPECIMENS PROPERTIES
|
PROPERTIES |
TEST METHODS |
VALUES |
| ELECTRICAL PROPERTIES |
Surface resistivity |
ASTM D257 |
107 - 109 Ohms/m² |
| MECHANICAL PROPERTIES |
Tensile modulus |
ISO 527-2/5A/50 |
1,121 MPa |
| Tensile Strength |
ISO 527-2/5A/50 |
24.3 MPa |
| Tensile strain at strength |
ISO 527-2/5A/50 |
3.1 % |
| Tensile Stress at Break |
ISO 527-2/5A/50 |
19.8 MPa |
| Tensile strain at break |
ISO 527 |
6.4 % |
| Flexural modulus |
ISO 178 |
856 MPa |
| Flexural stress at conventional deflection (3,5% strain)* |
ISO 178 |
27.3 MPa |
| Charpy impact resistance |
ISO 179-1/1eA |
10.9 kJ/m² |
| Shore Hardness |
ISO 868 |
66,7D |
| Note 1 |
*According to ISO 178, end of the test at 5% deformation even if there is no specimen break. |
| Note 2 |
The data should be considered as indicative values - Properties can be influenced by production conditions. |
