Zortrax M300 Dual Extrusion 3D Printer Zortrax M300 Dual Extrusion 3D Printer

$ 4,629.00
Type
-
+
$ 4,629.00
Add to wishlist

IN STOCK! Ready to be shipped out of Odessa, FL warehouse IMMEDIATELY!  

The LPD Plus technology designed for BIG industrial-grade results.

 

Various types of build platforms and a wide range of third-party filaments are fully supported. Not being limited to a single supplier allows choosing the setup perfectly tailored to the task at hand.

 

The M300 Dual is an efficient time-saving device fitted with advanced sensors to oversee the 3D printing process from start to finish with almost no supervision required.

 

The printer can reduce time lost due to power outages and various kinds of mechanical failures. In such cases the print is automatically paused and can be resumed right after the issue has been dealt with.

 

For Tips & Tricks on how to print Xstrand GF30-PA6 1.75MM on the Zortrax M200 Plus, Zortrax M300 Plus and Zortrax M300 Dual  

Industrial-quality results from desktop 3D printer 


 

Large workspace

Its large workspace measuring 265x265x300 mm is sufficient to print big models in one go.

Dual-extrusion system

The LPD Plus technology works with two nozzles and a double hot-end.

Blackout response system

The M300 Dual can detect a power outage and resume the printing from the same spot when the power is back on.

 

Capacitive sensor

The CDS allows automatic calibration of the printer regardless of the type of build-platform installed.

Advanced filament control

The M300 Dual automatically pauses the print when the filament's jammed, run out, or when the nozzle got clogged.

External materials support

Third-party filaments available on spools are fully supported in both single and dual extrusion modes.

 

 

Large format models made with a desktop-sized 3D printer


 

Step 1 Design

You can design models in all types of CAD software that support exporting files to .stl and .obj format or simply download them from the many online libraries.

Step 2 Print

Z-SUITE can send an already pre-processed model to one or more of your printers over Wi-Fi or Ethernet network.

Step 3 Remove supports

Water-soluble support filaments can be easily removed by rinsing. A dedicated Z-SUPPORT Premium dissolves quickly and leaves no remnants on the model.

Step 4 Go forward

Once the supports are removed, the model can work as a functional prototype or an end-use part in various industries.

 

 

Specification for Zortrax M300 Dual

Device features

Build volume

265 x 265 x 300 mm (10.4 x 10.4 x 11.8 in)

Nozzle diameter

0.4 mm (0.016 in)

Extruder

Dual material extruder with material jam detection

Extruder cooling system

Two fans cooling the extruder; radial fan cooling the print

Hotend

Dual material hotend

Platform

Heated; Perforated/Glass

Material Endstop

2 x Mechanical

Connectivity

Wi-Fi, Ethernet, USB

Operation system

Android

Processor

Quad Core

Touchscreen

4" IPS 800x480

Camera

Yes

Electrical

AC input

110 V ~ 5,9 A 50/60 Hz ; 240 V ~ 2,5 A 50/60 Hz

Maximum power consumption

400 W

Software

Software bundle

Z-SUITE

Supported file types

.stl, .obj, .dxf, .3mf

Supported operating systems

Mac OS X / Windows 7 and newer versions

In the box

3D Printer, Side Covers, Z-SUITE, Starter Kit, 1 spools of model material, 1 spool of support material, 2 spoolholders, Material Box, 1 perforated platform, 1 glass platform

Printing

Technology

LPD Plus (Layer Plastic Deposition Plus) – advanced technology with the system of Dissolvable Support Structures

Layer resolution

100 - 300 microns (for 0.4 mm 0.016 in nozzle)

Minimal wall thickness

400 microns (for 0.4 mm 0.016 in nozzle)

Platform leveling

Automatic measurement of platform points height / manual measurement of platform points height

Temperature

Maximum printing temperature (extruder)

310° C (590° F)

Maximum platform temperature

105° C (221° F)

Ambient operation temperature

20 - 30° C (68- 86° F)

Storage temperature

0 - 35° C (32- 95° F)

Filaments

Dedicated filaments

Z-NYLON, Z-ABS, Z-ULTRAT, Z-PETG, Z-GLASS, Z-PLA, Z-ULTRAT PLUS, Z-SUPPORT PREMIUM

External filaments

Applicable

Support

Mechanically removed - printed with the same material as the model / Dissolvable – printed with a different material than the model

Filament container

Spool

Filament diameter

1.75 mm (0.069 in)

 

 

IN STOCK! Ready to be shipped out of Odessa, FL warehouse IMMEDIATELY!  

The LPD Plus technology designed for BIG industrial-grade results.

 

Various types of build platforms and a wide range of third-party filaments are fully supported. Not being limited to a single supplier allows choosing the setup perfectly tailored to the task at hand.

 

The M300 Dual is an efficient time-saving device fitted with advanced sensors to oversee the 3D printing process from start to finish with almost no supervision required.

 

The printer can reduce time lost due to power outages and various kinds of mechanical failures. In such cases the print is automatically paused and can be resumed right after the issue has been dealt with.

 

For Tips & Tricks on how to print Xstrand GF30-PA6 1.75MM on the Zortrax M200 Plus, Zortrax M300 Plus and Zortrax M300 Dual  

Industrial-quality results from desktop 3D printer 


 

Large workspace

Its large workspace measuring 265x265x300 mm is sufficient to print big models in one go.

Dual-extrusion system

The LPD Plus technology works with two nozzles and a double hot-end.

Blackout response system

The M300 Dual can detect a power outage and resume the printing from the same spot when the power is back on.

 

Capacitive sensor

The CDS allows automatic calibration of the printer regardless of the type of build-platform installed.

Advanced filament control

The M300 Dual automatically pauses the print when the filament's jammed, run out, or when the nozzle got clogged.

External materials support

Third-party filaments available on spools are fully supported in both single and dual extrusion modes.

 

 

Large format models made with a desktop-sized 3D printer


 

Step 1 Design

You can design models in all types of CAD software that support exporting files to .stl and .obj format or simply download them from the many online libraries.

Step 2 Print

Z-SUITE can send an already pre-processed model to one or more of your printers over Wi-Fi or Ethernet network.

Step 3 Remove supports

Water-soluble support filaments can be easily removed by rinsing. A dedicated Z-SUPPORT Premium dissolves quickly and leaves no remnants on the model.

Step 4 Go forward

Once the supports are removed, the model can work as a functional prototype or an end-use part in various industries.

 

 

Specification for Zortrax M300 Dual

Device features

Build volume

265 x 265 x 300 mm (10.4 x 10.4 x 11.8 in)

Nozzle diameter

0.4 mm (0.016 in)

Extruder

Dual material extruder with material jam detection

Extruder cooling system

Two fans cooling the extruder; radial fan cooling the print

Hotend

Dual material hotend

Platform

Heated; Perforated/Glass

Material Endstop

2 x Mechanical

Connectivity

Wi-Fi, Ethernet, USB

Operation system

Android

Processor

Quad Core

Touchscreen

4" IPS 800x480

Camera

Yes

Electrical

AC input

110 V ~ 5,9 A 50/60 Hz ; 240 V ~ 2,5 A 50/60 Hz

Maximum power consumption

400 W

Software

Software bundle

Z-SUITE

Supported file types

.stl, .obj, .dxf, .3mf

Supported operating systems

Mac OS X / Windows 7 and newer versions

In the box

3D Printer, Side Covers, Z-SUITE, Starter Kit, 1 spools of model material, 1 spool of support material, 2 spoolholders, Material Box, 1 perforated platform, 1 glass platform

Printing

Technology

LPD Plus (Layer Plastic Deposition Plus) – advanced technology with the system of Dissolvable Support Structures

Layer resolution

100 - 300 microns (for 0.4 mm 0.016 in nozzle)

Minimal wall thickness

400 microns (for 0.4 mm 0.016 in nozzle)

Platform leveling

Automatic measurement of platform points height / manual measurement of platform points height

Temperature

Maximum printing temperature (extruder)

310° C (590° F)

Maximum platform temperature

105° C (221° F)

Ambient operation temperature

20 - 30° C (68- 86° F)

Storage temperature

0 - 35° C (32- 95° F)

Filaments

Dedicated filaments

Z-NYLON, Z-ABS, Z-ULTRAT, Z-PETG, Z-GLASS, Z-PLA, Z-ULTRAT PLUS, Z-SUPPORT PREMIUM

External filaments

Applicable

Support

Mechanically removed - printed with the same material as the model / Dissolvable – printed with a different material than the model

Filament container

Spool

Filament diameter

1.75 mm (0.069 in)

 

 

Recently Viewed Products Recently Viewed Products