XSTRAND™ GF30-PA6 - 2.85MM - 500G - BLACK XSTRAND™ GF30-PA6 - 2.85MM - 500G - BLACK

$ 89.00
-
+
$ 89.00
Add to wishlist

GF-30 PA6:

Features and Benefits:

  • Materials designed for functional prototyping and industrial applications
  • Engineered reinforced plastics
  • Very stiff and strong
  • Large operational temperature range: -20 ˚C to 120 ˚C
  • Good chemical and UV resistance
  • Excellent layer adhesion
  • No warping

Printing Recommendations:

  • XSTRAND™ filaments are designed to be compatible with most of open fused filament fabrication 3D printers available on the market.
  • Hardened steel nozzle is highly recommended to print XSTRAND™. When melted, XSTRAND™ filament can be abrasive due to its glass reinforcement. Using hardened steel nozzles and extruder driving wheels is advised. Hardened steel nozzles can be found at

https://www.p3-d.com/collections/duraplat-3d-extruder-nozzles

or

https://www.3dxtech.com/e3dv6-hercules-a2-hardened-steel-nozzle/

 

  • Nozzle diameter: >0.4mm
  • It’s recommended to start with default setting for nylon materials in the slicer software.
    • Nozzle temperature: 220 – 280 ̊C
    • Bed temperature: 80-110 ̊C
  • Better bed adhesion is achieved using the following components for standard nylon printing.
    • Perforated bed (such as the one on Zortrax machines). If you are using a perforated bed, you don’t need kapton tape or glue sticks.
    • If you are printing on glass bed, a regular all-purpose elmer’s glue stick is preferred for better bed adhesion.
    • If you are printing on PI Katpon adhesive tape, a glue stick is also recommended.
    • Or you can choose to use a PEI sheet

Case studies:

About Owens Corning:

  • A world leader in glass fiber composite
  • More than 500 researchers in five R&D centers
  • $5.7 billion sales (2016)
  • 17,000 employees in 33 countries
  • 3D Printing labs in Ohio, USA and France

 

 

 


GF-30 PA6:

Features and Benefits:

  • Materials designed for functional prototyping and industrial applications
  • Engineered reinforced plastics
  • Very stiff and strong
  • Large operational temperature range: -20 ˚C to 120 ˚C
  • Good chemical and UV resistance
  • Excellent layer adhesion
  • No warping

Printing Recommendations:

  • XSTRAND™ filaments are designed to be compatible with most of open fused filament fabrication 3D printers available on the market.
  • Hardened steel nozzle is highly recommended to print XSTRAND™. When melted, XSTRAND™ filament can be abrasive due to its glass reinforcement. Using hardened steel nozzles and extruder driving wheels is advised. Hardened steel nozzles can be found at

https://www.p3-d.com/collections/duraplat-3d-extruder-nozzles

or

https://www.3dxtech.com/e3dv6-hercules-a2-hardened-steel-nozzle/

 

  • Nozzle diameter: >0.4mm
  • It’s recommended to start with default setting for nylon materials in the slicer software.
    • Nozzle temperature: 220 – 280 ̊C
    • Bed temperature: 80-110 ̊C
  • Better bed adhesion is achieved using the following components for standard nylon printing.
    • Perforated bed (such as the one on Zortrax machines). If you are using a perforated bed, you don’t need kapton tape or glue sticks.
    • If you are printing on glass bed, a regular all-purpose elmer’s glue stick is preferred for better bed adhesion.
    • If you are printing on PI Katpon adhesive tape, a glue stick is also recommended.
    • Or you can choose to use a PEI sheet

Case studies:

About Owens Corning:

  • A world leader in glass fiber composite
  • More than 500 researchers in five R&D centers
  • $5.7 billion sales (2016)
  • 17,000 employees in 33 countries
  • 3D Printing labs in Ohio, USA and France

 

 

 

Recently Viewed Products Recently Viewed Products