ULTIMAKER MATERIAL STARTER BUNDLE 8/2 (DUAL EXTRUSION) ULTIMAKER MATERIAL STARTER BUNDLE 8/2 (DUAL EXTRUSION)

$ 599.50 $ 569.00
MATERIAL
-
+
$ 569.00
Add to wishlist

The Ultimaker Material Starter Bundle 8/2 (Dual Extrusion) includes 8 spools of Ultimaker NFC PLA 2.85mm (750g) or Tough PLA (750g) and 2 spools of Ultimaker NFC PVA 2.85mm (750g).

This bundle is suitable for printers with dual extrusion capabilities, such as the Ultimaker 3 or Ultimaker S5

Before adding to your cart, select the filament option (PLA or Tough PLA). Both materials are easy to print. PLA is available in a wider range of colors but isn't as strong as Tough PLA. Tough PLA offers the toughness of ABS with the safety and ease of use found in regular PLA.

The following is a list of the colors and quantities you will receive, depending on your choice of PLA or Tough PLA.


PLA and PVA

     (1) Ultimaker NFC PLA 2.85mm (750g) White

    (1) Ultimaker NFC PLA 2.85mm (750g) Black

    (1) Ultimaker NFC PLA 2.85mm (750g) Magenta

    (1) Ultimaker NFC PLA 2.85mm (750g) Red

    (1) Ultimaker NFC PLA 2.85mm (750g) Yellow

    (1) Ultimaker NFC PLA 2.85mm (750g) Blue

    (1) Ultimaker NFC PLA 2.85mm (750g) Green

    (1) Ultimaker NFC PLA 2.85mm (750g) Silver Metallic

    (2) Ultimaker NFC PVA 2.85mm (750g)


    TOUGH PLA and PVA

      (2) Ultimaker NFC Tough PLA 2.85mm (750g) White

      (2) Ultimaker NFC Tough PLA 2.85mm (750g) Black

      (2) Ultimaker NFC Tough PLA 2.85mm (750g) Red

      (2) Ultimaker NFC Tough PLA 2.85mm (750g) Green

      (2) Ultimaker NFC PVA 2.85mm (750g)


         ULTIMAKER MATERIAL STARTER BUNDLE 8/2 (DUAL EXTRUSION)

        IMPORTANT NOTE ON COMPATIBILITY:

        Automatic material detection with this filament will only work when used with the newer Ultimaker 3 or Ultimaker S5 printers.

        Ultimaker Material Starter Bundle 8/2 (Dual Extrusion)
        The new Ultimaker NFC 2.85 mm filament is 100% compatible with Ultimaker 2+, Ultimaker 2 Extended+, Ultimaker 2 Go and the Ultimaker Original+ Kit. The previous generation of non-NFC Ultimaker filament is 100% compatible with the Ultimaker 3 and Ultimaker S5.

        The difference is that you will only get the benefit of automatic material detection when using the Ultimaker NFC 2.85 mm filament exclusively with the newer Ultimaker 3 or Ultimaker S5 printers

         

        The Ultimaker Material Starter Bundle 8/2 (Dual Extrusion) includes 8 spools of Ultimaker NFC PLA 2.85mm (750g) or Tough PLA (750g) and 2 spools of Ultimaker NFC PVA 2.85mm (750g).

        This bundle is suitable for printers with dual extrusion capabilities, such as the Ultimaker 3 or Ultimaker S5

        Before adding to your cart, select the filament option (PLA or Tough PLA). Both materials are easy to print. PLA is available in a wider range of colors but isn't as strong as Tough PLA. Tough PLA offers the toughness of ABS with the safety and ease of use found in regular PLA.

        The following is a list of the colors and quantities you will receive, depending on your choice of PLA or Tough PLA.


        PLA and PVA

           (1) Ultimaker NFC PLA 2.85mm (750g) White

          (1) Ultimaker NFC PLA 2.85mm (750g) Black

          (1) Ultimaker NFC PLA 2.85mm (750g) Magenta

          (1) Ultimaker NFC PLA 2.85mm (750g) Red

          (1) Ultimaker NFC PLA 2.85mm (750g) Yellow

          (1) Ultimaker NFC PLA 2.85mm (750g) Blue

          (1) Ultimaker NFC PLA 2.85mm (750g) Green

          (1) Ultimaker NFC PLA 2.85mm (750g) Silver Metallic

          (2) Ultimaker NFC PVA 2.85mm (750g)


          TOUGH PLA and PVA

            (2) Ultimaker NFC Tough PLA 2.85mm (750g) White

            (2) Ultimaker NFC Tough PLA 2.85mm (750g) Black

            (2) Ultimaker NFC Tough PLA 2.85mm (750g) Red

            (2) Ultimaker NFC Tough PLA 2.85mm (750g) Green

            (2) Ultimaker NFC PVA 2.85mm (750g)


               ULTIMAKER MATERIAL STARTER BUNDLE 8/2 (DUAL EXTRUSION)

              IMPORTANT NOTE ON COMPATIBILITY:

              Automatic material detection with this filament will only work when used with the newer Ultimaker 3 or Ultimaker S5 printers.

              Ultimaker Material Starter Bundle 8/2 (Dual Extrusion)
              The new Ultimaker NFC 2.85 mm filament is 100% compatible with Ultimaker 2+, Ultimaker 2 Extended+, Ultimaker 2 Go and the Ultimaker Original+ Kit. The previous generation of non-NFC Ultimaker filament is 100% compatible with the Ultimaker 3 and Ultimaker S5.

              The difference is that you will only get the benefit of automatic material detection when using the Ultimaker NFC 2.85 mm filament exclusively with the newer Ultimaker 3 or Ultimaker S5 printers

               

              Recently Viewed Products Recently Viewed Products