Phrozen TR300 Ultra-High Temp 3D Printing Resin - 1KG

$ 60.00

$ 60.00

Phrozen TR300 Ultra-High Temp 3D Printing Resin - 1KG

Phrozen TR300 3D Printing Resin comes with extremely high thermal resistance, high mechanical strength, and a certain stiffness, making it ideal for high-temperature applications such as industrial mock-ups, and creating 3D printed jewelry.

  • Ultra-High Temp Resistance: With its heat deflection temperature of 160 °C, Phrozen TR300 3D Printing High Temp resin is suitable for high-temperature resistance applications.
  • Low Viscosity & Low Odor: Phrozen TR300 High Temperature 3D Printing resin has low viscosity to use and clean easily. Odorless to affect the environment during printing.
  • High Toughness & Low Shrinkage: The products printed with Phrozen TR300 High-Temp 3D Printer resin have good mechanical properties such as high tensile strength, high toughness, and a low shrinkage rate. It is recommended for industrial prototyping.


  • Make sure to preserve resin at room temperature. Store in dark and ventilated conditions.
  • After printing, please keep used resins in a closed & opaque bottle.
  • Avoid mixing used resin with new resin.
  • Keep resin away from kids and away from direct sunlight exposure.
  • Wear gloves and masks when using resins.
  • If this chemical contacts the skin or eye, wash with plenty of water. DO NOT dump resin.
  • Please cure it and treat it as general plastic garbage.

Phrozen TR300 Ultra-High Temp Specs

  • Weight: 1kg per bottle (Gray)
  • Density: 1.17 g/cm3
  • Viscosity: 123.6 cP
  • Surface Hardness: 80 Shore D
  • Tensile Stress at Break: 59.9 MPa
  • Tensile modulus: 3443.7 MPa
  • Elongation at Break, EAB: 3.9 %
  • Notched Izod Impact:22.1 J/m
  • HDT at 0.45MPa: 160°C (w200 °C, 1HR)

Recently Viewed Products