The Magigoo PRO Bed Adhesion kit was designed with professional 3D printing users in mind. Comprised of four specialized adhesives – each designed to work exclusively with technical filaments – the Magigoo Pro Adhesion kit has your adhesion needs covered no matter the material.
Magigoo is the easy, no-mess solution born from the frustration almost all 3D printer enthusiasts face; bed adhesion problems, 3D prints stuck to the bed, and warped first layers. The folks at Magigoo have created the easiest, no-mess product on the market to help you overcome all three of these problems! Not only will your 3D prints stick every time, but there is also no smell, it’s completely safe for the environment, and it cleans up quick and easy with only water or a damp cloth. You won’t need a spatula to remove your creations, and one 50ml tube will easily last you over 100 prints!
Magigoo PA – Designed to work exclusively with Polyamide filaments. Works with standard Nylons, as well as those that have been reinforced with glass or carbon fiber.
Magigoo PC – Designed to work exclusively with Polycarbonate filaments. PC works to minimize the effects of warping and splitting which are common when printing with Polycarbonate materials.
Magigoo PP – Designed to work exclusively with Polypropylene filaments. PP provides the extra adhesion support needed to guarantee excellent first layer bed adhesion when printing with Polypropylene materials.
Magigoo Original – The original Magigoo formula. Suitable for use with a variety of filaments including most PLA, ABS, HIPS, PETG, and TPU filaments.
Non-Toxic and Odorless
The Magigoo stick won’t stink up your workspace with nasty chemicals.
Easy to Apply and Easy to Remove Prints
Just brush it on the bed, and let it dry. 3D Prints adhere tight, but removal is quick and easy.
You can get over 100 applications from one 50ml tube of Magigoo.
Use On Any Material
It doesn’t matter if you’re using PLA, ABS, PETG and more - Magigoo works for them all
Magigoo cleans up with just a damp cloth or water!
HOW TO USE
Shake the bottle
Apply to the desired area by pressing the nib on the bed (activates the inner valve)
Print according to filament / printer manufacturer recommendation
Allow to cool and remove. The print should pop right off
Clean using a damp cloth