KIMYA PLA-R Filament - 750 grams, 2.2 kilos
The 3D filament Kimya PLA-R is a recycled and biodegradable polymer: this biosourced homopolymer can be obtained from corn starch. Polylactic acid (PLA) is a natural alternative to polyethylene. It is easy to print and is odorless. The 3D filament Kimya PLA-R can be used in industrial applications, notably packaging, and also in domestic applications: creation of everyday objects, toys, prototypes and for use in modeling. It offers the following properties:
- Easy to print
- Odorless
- Glossy finish
- ≥ 97% recycled materials (100% recycled materials – PLA-R Natural)
- Eligible to the EN 13432 and EN 14995 standards (PLA-R Natural)
- Complies with the REACH standard
- Product Dimensions: 20.7 × 20.5 × 6 cm; 1.1 kg
FILAMENT PROPERTIES
| PROPERTIES |
TEST METHODS |
VALUES |
| Diameter |
INS-6712 |
1.75 ± 0.1 mm
2.85 ± 0.1 mm |
| Density |
ISO 1183-1 |
1.24 g/cm3 |
| Moisture rate |
INS-6711 |
< 1 % |
| Melt flow index (MFI) |
ISO 1133-1 (@210°C – 2,16 kg) |
9 - 12 g/10min |
| Glass transition temperature (Tg) |
ISO 11357-1 DSC (10°C/min - 20-220°C) |
61 °C |
| Melting Temperature (Tm) |
ISO 11357-1 DSC (10°C/min – 20-220°C) |
150 °C |
PRINT PARAMETERS AND SPECIMENS DIMENSIONS
| PRINTING DIRECTION |
XY |
| Printing Speed |
40-150 mm/s |
| Infill |
100% - rectilinear |
| Infill Angle |
45°/-45° |
| Nozzle Temperature |
190-210°C |
| Bed T° |
20-60°C |
PRINTED SPECIMENS PROPERTIES
|
PROPERTIES |
TEST METHODS |
VALUES |
| MECHANICAL PROPERTIES |
Tensile modulus |
ISO 527-2/5A/50 |
2,963 MPa |
| Tensile Strength |
ISO 527-2/5A/50 |
57.9 MPa |
| Tensile strain at strength |
ISO 527-2/5A/50 |
2.2 % |
| Tensile Stress at Break |
ISO 527-2/5A/50 |
47.3 MPa |
| Tensile strain at break |
ISO 527-2/5A/50 |
4 % |
| Flexural modulus |
ISO 178 |
2,675 MPa |
| Flexural stress at conventional deflection (3,5% strain)* |
ISO 178 |
88.8 MPa |
| Flexural stress at break |
ISO 178 |
91.6 MPa |
| Charpy impact resistance |
ISO 179-1/1eA |
3.22 kJ/m² |
| Shore Hardness |
ISO 868 |
79.1D |
| Note 1 |
*According to ISO 178, end of the test at 5% deformation even if there is no specimen break. |
| Note 2 |
The data should be considered as indicative values - Properties can be influenced by production conditions. |
