KIMYA ABS-EC Filament

$ 74.40

Diameter
-
+
$ 74.40
Add to wishlist

Kimya ABS-EC Filament - 500 grams

The Kimya ABS-EC 3D filament belongs to the styrenic polymer family. Acrylonitrile Butadiene Styrene electrical conductor (ABS-EC) is a combination of ABS and electrically active additives: carbon nanotubes. ABS-EC is resistant to impact, heat and ageing. It is used in the automotive and electronics industries. The Kimya ABS-EC 3D filament has the following properties:

  • Good resistance to impact
  • High temperature resistance
  • Electrical conductivity
  • Complies with the REACH standard
  • Product Dimensions: 20.7 × 20.5 × 6 cm; 0.8 kg

FILAMENT PROPERTIES

PROPERTIES TEST METHODS VALUES
Diameter INS-6713 1.75 ± 0.05 mm
2.85 ± 0.05 mm
Density ISO 1183-1 1.035 g/cm3
Moisture rate INS-6711 < 0.5 %
Melt flow index (MFI) ISO 1133-1 (@260°c – 10 kg) 8 - 16 g/10min
Glass transition temperature (Tg) ISO 11357-1 DSC (10°C/min - 20-300°C) 108 °C

PRINT PARAMETERS AND SPECIMENS DIMENSIONS

PRINTING DIRECTION XY
Printing Speed 20-60 mm/s
Infill 100% - rectilinear
Infill Angle 45°/-45°
Nozzle Temperature 260-280°C
Bed T° 90-110°C

PRINTED SPECIMENS PROPERTIES

PROPERTIES TEST METHODS VALUES
ELECTRICAL PROPERTIES Surface resistivity ASTM D257 < 106 Ohms/m²
MECHANICAL PROPERTIES Tensile modulus ISO 527-2/5A/50 2,398 MPa
Tensile Strength ISO 527-2/1A/50 36.7 MPa
Tensile strain at strength ISO 527-2/1A/50 2 %
Tensile Stress at Break ISO 527-2/5A/50 29.2 MPa
Tensile strain at break ISO 527-2/5A/50 5 %
Flexural modulus ISO 178 1,393 MPa
Flexural stress at conventional deflection (3,5% strain)* ISO 178 49.3 MPa
Charpy impact resistance ISO 179-1/1eA 27 kJ/m²
Shore Hardness ISO 868 67,2
Note 1 *According to ISO 178, end of the test at 5% deformation even if there is no specimen break.
Note 2 The data should be considered as indicative values - Properties can be influenced by production conditions.

Recently Viewed Products