Harz labs - model resin form2 Harz labs - model resin form2

$ 149.00

COLOR
WHITE
CLEAR
GREY
-
+
$ 149.00
Add to wishlist

Model Resin Form2

Designed for printing models that have increased requirements for mechanical properties. Durable, non-shrinking and odorless

 

Designed for printing models that have higher requirement for mechanical properties. Durable, non-shrinking and odorless

The fully cured polymer is very hard and elastic the same time. This allows you to print functional parts that can withstand mechanical stress.

Cured models are resistant to decay and can withstand high temperatures (up to 100°C), which makes it possible to use models to create silicone molds by cold and hot vulcanization. Works with two-component silicones on both platinum and tin catalysts.

 

 

Liquid

The resin has relatively low viscosity. It decreases time for leveling, easy to clean to provide maximum accuracy at minimum time.

Odorless

Resins are odorless and cause no irritation, so you can work with natural ventilation without special technique

Low Shrinkage

Shrink less than 0.5% gives you the same size like 3D model on your computer and it doesn't change size after postcuring.

Hard but Tough
Resins have 85-92 Shore D hardness the same time elastic. These unique properties are very useful in printing durable non-brittle models, you can use master-models for casting in rubber several times

Stable
Resin is very stable, you can leave it for a long time in the vat, no sedimentation and gel formation occur - no needto mix even pigment containing resins such as White, Black, Blue, Grey

Heat Resistant 

Models has long-term stability under 100°C that make possible to cast it in cold and hot silicone or 2k resin molds. Also has short-term stability up to 180°C and models can be used for films thermosettling

Safe

Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction

Color

Very wide color choice gives an advantage to the customer. Clear and White resins are specially for DIY tinting so you can easily get your own color shade.

 

 Compatible Printers

 

Characteristics

Apperance: Colored transparent liquid

Color: Grey, White, Clear

Odor: Odorless

Viscosity according to Brookfield: 0.8-1 Pa*s

Tensile Strength: 45 N/mm2

Elongation at break: 4-6%

Hardness Shore D: 87-92

Shrinkage: <0.5%

Model Resin Form2 MSDS

Model Resin Form2

Designed for printing models that have increased requirements for mechanical properties. Durable, non-shrinking and odorless

 

Designed for printing models that have higher requirement for mechanical properties. Durable, non-shrinking and odorless

The fully cured polymer is very hard and elastic the same time. This allows you to print functional parts that can withstand mechanical stress.

Cured models are resistant to decay and can withstand high temperatures (up to 100°C), which makes it possible to use models to create silicone molds by cold and hot vulcanization. Works with two-component silicones on both platinum and tin catalysts.

 

 

Liquid

The resin has relatively low viscosity. It decreases time for leveling, easy to clean to provide maximum accuracy at minimum time.

Odorless

Resins are odorless and cause no irritation, so you can work with natural ventilation without special technique

Low Shrinkage

Shrink less than 0.5% gives you the same size like 3D model on your computer and it doesn't change size after postcuring.

Hard but Tough
Resins have 85-92 Shore D hardness the same time elastic. These unique properties are very useful in printing durable non-brittle models, you can use master-models for casting in rubber several times

Stable
Resin is very stable, you can leave it for a long time in the vat, no sedimentation and gel formation occur - no needto mix even pigment containing resins such as White, Black, Blue, Grey

Heat Resistant 

Models has long-term stability under 100°C that make possible to cast it in cold and hot silicone or 2k resin molds. Also has short-term stability up to 180°C and models can be used for films thermosettling

Safe

Resin does not contain solvents and volatile monomers, irritating compounds. No fumes, odor and allergic reaction

Color

Very wide color choice gives an advantage to the customer. Clear and White resins are specially for DIY tinting so you can easily get your own color shade.

 

 Compatible Printers

 

Characteristics

Apperance: Colored transparent liquid

Color: Grey, White, Clear

Odor: Odorless

Viscosity according to Brookfield: 0.8-1 Pa*s

Tensile Strength: 45 N/mm2

Elongation at break: 4-6%

Hardness Shore D: 87-92

Shrinkage: <0.5%

Model Resin Form2 MSDS

Recently Viewed Products Recently Viewed Products