Harz Labs Dental Sand A1-A2 Resin - 1kg

$ 210.99

-
+
$ 210.99

Dental Sand A1-A2

Designed for dental demonstration models of crowns and bridges. Very tough, non-irritant, odorless resin with color A1-A2 according to vita scale

Dental Sand A1-A2/A3 resin is PMMA-like micro filled composite resin, made of biocompatible raw materials, with color close to A1-A2/A3 according to Vita scale. It has high hardness 90 Shore D and high tensile strength, stable to mechanical stress and chemicals. Recommended for printing of temporary crowns and bridges. Low odor and absence of harmful monomers allows to print in the laboratory.

Odorless and Safe

Resin does not contain solvent and volatile monomers, irritating compounds. No fumes, odor and allergic reaction, can be used in lab or even at home.

Biocompatible

Produced from bio-compatible raw material used in photopolymer teeth fillings

Low Shrinkage

Shrinkage less than 0.5% gives you the same size like 3D model on your computer and it doesn't change size after postcuring.

Unique Mechanical Properties

Very high hardness, tensile strength abrasion and scratch resistance due to ceramic fillers

High Chemical Resistance

Resin is stable to solvents, aggressive inorganic media like acids and alkalis

Stable Color

Depending on postcuring condition A1 or A2 color is achievable. It is stable for a long time even in aggressive media.

Composition Stability
Pigments and fillers are well stabilized, no sedimentation and flocculation occur and no foam appears

Compatible Printers

Characteristics

Apperance: Opaque liquid

Color: Beige

Odor: Odorless

Viscosity according to Brookfield: 1.2-1.5 Pa*s

Tensile strength: 60 N/mm2

Elongation at break: 3-4%

Hardness Shore D: 90-92

Shrinkage:<0.5%

For Information on creating profiles for Phrozen Shuffle: Click here

Dental Sand A1-A2 MSDS

Recently Viewed Products