Fun To Do F1+ Resin - Transparent 1kg

FunToDo F1 + photopolymer is designed specifically for owners of SLA 3D printers. Polymer tested on Formlabs Form 1, 1+ and Form 2 printers and compatible with PreForm software.
Due to the high resolution of the polymer, especially black, amazing print accuracy is achieved with a layer thickness of 0.02 mm. To obtain the desired shade of color, pigment can be added to the transparent or white F1 + polymer. Get a signature pigment kit and mix in any proportion.

Available only in version: LR (Low Reactive ) - low sensitivity. Mostly for SLA printers, with limited fine-tuning options. DLP / LED printers will require longer exposure times.

Characteristics:
Packing: 1 kg
Color: Transparent, White, Gray or Black
Fragrance: No pronounced odor
Brookfield Viscosity: 95 mPa * s at 25 ° C
Shore D: 80
Density: 1.02 g / cm³
Shrinkage: <0.5%
Z axis resolution (layer height): 20 to 200 microns
Illumination spectrum: from 225 to 415 nm
Storage conditions: 10 ° C 40 ° C, in a dark and dry place
Flushing: 40-60% ethanol, isopropanol or TEK1960

What's in the box?
FunToDo F1 + NXT GEN photopolymer