Bluecast X5 LCD / DLP Bluecast X5 LCD / DLP

$ 180.00

-
+
$ 180.00
Add to wishlist

X5 LCD / DLP RESIN

Fully compatible with all LCD printers like WANAHO D7, MICROMAKE 2017 L2, XAYAV Model V, etc  (405nm _ min. 30 watt LED power)

Washing mode: Ethyl / IPA alcohol 

UV care: Not needed

Shrinkage: Minimum

Color: Light Blue

Primercat: Suggested

Size: 500 gr

 

 BLUE CAST X5 FOR LCD/DLP 3d PRINTERS
- Custom syntetized oligomer by BlueCast, not available to market, patent is going to be applied.

- Excellent casting of small engravings both positive and negative

- Fits all jewelry needs from filigree to medals as well dental one

- Excellent for stones presetting

- Curing triggering tuned to maximize antialias smoothing

- No monomer inside, no smell

- No aggression on plastic parts (tested on PS, PMMA)

- No postcuring needed for casting

- No shrinkage

- Easy welding with wax, forget about pattern lost into investment

- Can be polished, engraved, drilled (postcure is needed)

- Low viscosity, easier to recover uncured resin from models, easy to wash

- No preheating required

- Very little hygroscopic while liquid, no water absorption while printed

- Atoxic, solvent free, very low phospine content, very low skin irritant

- Cleaner burnout, 0,00% ash residual

- Suitable for fast burnout

- Full burnout also at lower temperature (750 C°)

- No expansion during burnout, sublimation starts at 130 Celsius

- Excellent dimensional stability in time, no need to stock in cold/dark places

 

Instructions

MSDS

X5 LCD / DLP RESIN

Fully compatible with all LCD printers like WANAHO D7, MICROMAKE 2017 L2, XAYAV Model V, etc  (405nm _ min. 30 watt LED power)

Washing mode: Ethyl / IPA alcohol 

UV care: Not needed

Shrinkage: Minimum

Color: Light Blue

Primercat: Suggested

Size: 500 gr

 

 BLUE CAST X5 FOR LCD/DLP 3d PRINTERS
- Custom syntetized oligomer by BlueCast, not available to market, patent is going to be applied.

- Excellent casting of small engravings both positive and negative

- Fits all jewelry needs from filigree to medals as well dental one

- Excellent for stones presetting

- Curing triggering tuned to maximize antialias smoothing

- No monomer inside, no smell

- No aggression on plastic parts (tested on PS, PMMA)

- No postcuring needed for casting

- No shrinkage

- Easy welding with wax, forget about pattern lost into investment

- Can be polished, engraved, drilled (postcure is needed)

- Low viscosity, easier to recover uncured resin from models, easy to wash

- No preheating required

- Very little hygroscopic while liquid, no water absorption while printed

- Atoxic, solvent free, very low phospine content, very low skin irritant

- Cleaner burnout, 0,00% ash residual

- Suitable for fast burnout

- Full burnout also at lower temperature (750 C°)

- No expansion during burnout, sublimation starts at 130 Celsius

- Excellent dimensional stability in time, no need to stock in cold/dark places

 

Instructions

MSDS

Recently Viewed Products Recently Viewed Products