BLUE - MONOCURE RAPID 3D RESIN 1 LITER - FROM MONOCURE RESIN BLUE - MONOCURE RAPID 3D RESIN 1 LITER - FROM MONOCURE RESIN

$ 79.99
-
+
$ 79.99
Add to wishlist

DESCRIPTION

Our RAPID product range is designed for low powered LED DLP type printers such as the Wanhao Duplicator 7. The cure speed is up to 4 X faster than our standard resin.Feeling a little blue? The near solid blue appearance allows you to 3D print models or parts with a detailed smooth finish that will be blue in colour when cured.

TECHNICAL DATA

All Monocure 3D resins have a very wide range of reactivity, UV wavelengths of 225nm to wavelengths of 420nm. By incorporating a blend of photo-initiators, monomers & sensitizers, almost any UV light source can be used to initiate the polymerisation process of our resins.

Our resins have been tested with a 'Shore D Hardness Durometer' and have a rating of 70. (A hard hat has a rating of 80)

The Viscosity of our resin is 500 - 600cps @ 25°C (Brookfield RVT). 

All our resins have a low odour, have zero VOC emissions and display very low shrinkage properties <0.5%>

Please store Monocure 3D resin in a dark, cool place out of direct sunlight. 

Click here to download 3D Blue Resin - RAPID (3DR3585B) Data Sheet 

SDS

Click here to download Rapid Clear Resin (3DR3582C) MSDS 

 

 

Resin Porfile for Phrozen Shuffle: Click here

DESCRIPTION

Our RAPID product range is designed for low powered LED DLP type printers such as the Wanhao Duplicator 7. The cure speed is up to 4 X faster than our standard resin.Feeling a little blue? The near solid blue appearance allows you to 3D print models or parts with a detailed smooth finish that will be blue in colour when cured.

TECHNICAL DATA

All Monocure 3D resins have a very wide range of reactivity, UV wavelengths of 225nm to wavelengths of 420nm. By incorporating a blend of photo-initiators, monomers & sensitizers, almost any UV light source can be used to initiate the polymerisation process of our resins.

Our resins have been tested with a 'Shore D Hardness Durometer' and have a rating of 70. (A hard hat has a rating of 80)

The Viscosity of our resin is 500 - 600cps @ 25°C (Brookfield RVT). 

All our resins have a low odour, have zero VOC emissions and display very low shrinkage properties <0.5%>

Please store Monocure 3D resin in a dark, cool place out of direct sunlight. 

Click here to download 3D Blue Resin - RAPID (3DR3585B) Data Sheet 

SDS

Click here to download Rapid Clear Resin (3DR3582C) MSDS 

 

 

Resin Porfile for Phrozen Shuffle: Click here

Recently Viewed Products Recently Viewed Products