Bambu Lab Hotend with Nozzle- H2D

Quick Swap Nozzle Design

The special design of H2D hotend heating assembly enables easy separation of the thermal and electronic components of the hotend. Simply unlock the latch for quick and easy hotend removal and installation.

*Please ensure that the hotend has cooled down before swapping, and avoid touching the heat block (lower section of the hotend) to prevent any risk of burns.

0.2mm Nozzle - Optimal Print Fineness

Smaller diameter extrudes thin filaments

High resolution on the horizontal print surface

0.6mm and 0.8mm Nozzle - Faster Print Speed

Larger diameter extrudes more filaments per second, resulting in faster print speed

Comparison of Different Nozzle Sizes

Please Note:

1. Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle.
2. For filaments containing carbon fiber or glass fiber, it is highly recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion.
3. Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mm nozzle, while also achieving higher print quality.

Compatibility:

H2D and H2D Laser

In the Box

• Hotend with Nozzle *1

Product Specifications

• Max Printing Temp: 350 ℃
• Length: 49.2 mm

Manufacturer Number (.4mm Hardened Steel): FAH023

Manufacturer Number (.6mm Hardened Steel): FAH024

Manufacturer Number (.8mm Hardened Steel): FAH025

Manufacturer Number (.2mm Stainless Steel): FAH026