Bambu Lab Hotend with Hardened Steel Nozzle- A1 Series

$ 10.00

Size
-
+
$ 10.00

Highlights of Various Nozzle Diameters

0.2mm Nozzle
Optimal Print Fineness

Extremely small layer gaps
More detailed on the vertical print surface

.2mm nozle highlights
.2mm vs .4mm

0.2mm Nozzle
Optimal Print Fineness

Smaller diameter extrudes thin filaments

High resolution on the horizontal print surface

0.6mm and 0.8mm Nozzle
Faster Print Speed

Larger diameter extrudes more filaments per second, resulting in faster print speed



bambu nozzle size comparison

The 0.4mm nozzle is widely recognized as the standard nozzle diameter for modern 3D printers due to its optimal balance between print quality and print speed. This nozzle size is utilized in the Bambu Lab A1 Series 3D printers.



Filament Compatibility

Material 0.2 mm Nozzle 0.4 mm Nozzle 0.6 mm Nozzle 0.8 mm Nozzle Hardened Steel Required?
General PLA Yes Yes Yes Yes Optional
PLA Sparkle *① No Yes Yes Yes Optional
PLA Marble *① No Yes Yes Yes Optional
Wood/Rock/Metal-filled PLA *① No Yes Yes Yes Optional
PETG Yes Yes Yes Yes Optional
PVA Yes Yes Yes Yes Optional
ABS Yes Yes Yes Yes Optional
ASA Yes Yes Yes Yes Optional
PC Yes Yes Yes Yes Optional
PA *① No Yes Yes Yes * Optional
TPU *① No Yes Yes Yes * Optional
Bambu PLA-CF *① No *② Recommended Yes Yes * Required
Bambu PETG-CF *① No *② Recommended Yes Yes * Required
Bambu PAHT-CF *① No Yes *③ Recommended Yes * Required
Bambu PET-CF *① No Yes *③ Recommended Yes * Required
CF/GF Filaments from other brands *① No * Not Recommended Yes Yes * Required


[* Note]

  1. *① Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle.
  2. *② Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with ahardened steel 0.4 mm nozzle, while also achieving higher print quality.
  3. *③ For general carbon fiber or glass fiber filaments such as Bambu PAHT-CF and PET-CF, it isrecommendedto use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion.

Compatibility:

A1 Series

In the Box

  • Hotend with Nozzle

Product Specifications

  • Max Printing Temp: 300 ℃
  • Length: 47.3 mm
  • Packaging Weight: 30g
  • Packaging Size: 60*60*30 mm

Manufacturer Number (.4mm Hardened Steel): FAH019

Manufacturer Number (.6mm Hardened Steel): FAH020

Manufacturer Number (.8mm Hardened Steel): FAH021

Manufacturer Number (.2mm Stainless Steel): FAH018

Manufacturer Number (.4mm Stainless Steel): FAH007


Recently Viewed Products