3DFS - Ultimaker 3 Extended Safety Enclosure Kit Incl. Activated Carbon and HEPA Filtration Systems

There are many reasons to enclose your 3D printer, but the two main advantages of purchasing an add-on enclosure like the 3DFS are to maintain internal thermal conditions and to prevent fumes from invading your workspace. 

Ultimate 3D Printing Store has developed the sturdiest professional series enclosure lid available on the market. This enclosure lid is compatible with five Ultimaker 3D printers, including the company’s flagship machine, the Ultimaker S5, as well as the Ultimaker 3, Ultimaker 3 Extended, Ultimaker 2+ and Ultimaker 2 Extended.

Our enclosure, manufactured exclusively in the United States at Ultimate 3D Printing Store’s headquarters and warehouse in Odessa, Florida, is the add-on you need to complete your Ultimaker 3D printer purchase. We like to think of it as the cherry on top without the guilt or calories of a decadent dessert. Your Ultimaker 3D printer is a luxury machine, and luxury machines deserve and demand the most visually appealing and performance-ready add-ons available.

Currently, there is no “factory” enclosure available for the Ultimaker series of 3D printers. The Ultimaker S5 does come with front-opening doors from the factory. Our 3DFS safety enclosure for the Ultimaker series of printers, excluding the Ultimaker S5, comes with both a spring-loaded, front-opening door and a lid for easy access. Even better, our exclusive enclosure has no screw holes whatsoever. It comes pre-assembled and ready to take from the shipping box to your printer with little to no effort at all. It is designed to fit over your Ultimaker 3D printer. It pops on and locks in, providing a seamless aesthetic appearance without the distraction of visible screws and screw holes.

The 3DFS safety enclosure is entirely clear, allowing you to see inside your machine at any time during the printing process.

And it comes with the 3DFS activated carbon and HEPA filter, and all mounting hardware.

To maximize the life of your enclosure, we recommend that you never use a cleaning solution that contains ammonia when cleaning the enclosure. Traditional cleaners such as Windex or Formula 409 will do more harm than good. We advise customers to only use products that are specifically recommended for cleaning acrylic surfaces, such as Novus Plastic Polish #1, Brillianize Plastic and Glass Cleaner Polish or Plexus Plastic Cleaner, Protectant and Polish.

3DFS - 3Domus Filtration Systems

In ancient Rome, the term “domus” was used to describe the residence where upper-class and wealthy residents lived during the Republican and Imperial eras.

More than 2000 years later, Ultimate 3D Printing Store has adopted the term to describe its high-end dome enclosure, manufactured exclusively by U3DPS at its warehouse in Odessa, Florida, for use with the Ultimaker S5, the Ultimaker 3, Ultimaker 3 Extended, Ultimaker 2+ and Ultimaker 2 Extended series 3D printers.

This enclosure is made separate of Ultimaker by U3DPS to provide users with a state-of-the-art enclosure and optional filtration system that not only maintains internal thermal conditions and prevents fumes from invading your workspace, but it adds an aesthetic element lacking from the machine by itself.

U3DPS designed this enclosure specifically for the Ultimaker brand, which is widely regarded as the world’s best FDM 3D printer, for a very simple reason: It completes your Ultimaker series printer.

None of the Ultimaker series 3D printers currently come with an enclosure, and anyone who works with one of these printers, especially in an enclosed environment, should have this enclosure, not only to protect the machine from outside contaminants, as well as their investment, and to maintain internal temperature, but also to keep their work environment free of fumes during the printing process.

U3DPS is proud to be the only company in the world manufacturing a safety enclosure for Ultimaker series 3D printers. If you see a safety enclosure for sale, and it does not include our exclusive 3DFS designation, then you are not buying an enclosure made exclusively by Ultimate 3D Printing Store for your Ultimaker series printer.

3DFS - Ultimaker 3 Extended Safety Enclosure Kit Incl. Activated Carbon and HEPA Filtration Systems

There are many reasons to enclose your 3D printer, but the two main advantages of purchasing an add-on enclosure like the 3DFS are to maintain internal thermal conditions and to prevent fumes from invading your workspace. 

Ultimate 3D Printing Store has developed the sturdiest professional series enclosure lid available on the market. This enclosure lid is compatible with five Ultimaker 3D printers, including the company’s flagship machine, the Ultimaker S5, as well as the Ultimaker 3, Ultimaker 3 Extended, Ultimaker 2+ and Ultimaker 2 Extended.

Our enclosure, manufactured exclusively in the United States at Ultimate 3D Printing Store’s headquarters and warehouse in Odessa, Florida, is the add-on you need to complete your Ultimaker 3D printer purchase. We like to think of it as the cherry on top without the guilt or calories of a decadent dessert. Your Ultimaker 3D printer is a luxury machine, and luxury machines deserve and demand the most visually appealing and performance-ready add-ons available.

Currently, there is no “factory” enclosure available for the Ultimaker series of 3D printers. The Ultimaker S5 does come with front-opening doors from the factory. Our 3DFS safety enclosure for the Ultimaker series of printers, excluding the Ultimaker S5, comes with both a spring-loaded, front-opening door and a lid for easy access. Even better, our exclusive enclosure has no screw holes whatsoever. It comes pre-assembled and ready to take from the shipping box to your printer with little to no effort at all. It is designed to fit over your Ultimaker 3D printer. It pops on and locks in, providing a seamless aesthetic appearance without the distraction of visible screws and screw holes.

The 3DFS safety enclosure is entirely clear, allowing you to see inside your machine at any time during the printing process.

And it comes with the 3DFS activated carbon and HEPA filter, and all mounting hardware.

To maximize the life of your enclosure, we recommend that you never use a cleaning solution that contains ammonia when cleaning the enclosure. Traditional cleaners such as Windex or Formula 409 will do more harm than good. We advise customers to only use products that are specifically recommended for cleaning acrylic surfaces, such as Novus Plastic Polish #1, Brillianize Plastic and Glass Cleaner Polish or Plexus Plastic Cleaner, Protectant and Polish.

3DFS - 3Domus Filtration Systems

In ancient Rome, the term “domus” was used to describe the residence where upper-class and wealthy residents lived during the Republican and Imperial eras.

More than 2000 years later, Ultimate 3D Printing Store has adopted the term to describe its high-end dome enclosure, manufactured exclusively by U3DPS at its warehouse in Odessa, Florida, for use with the Ultimaker S5, the Ultimaker 3, Ultimaker 3 Extended, Ultimaker 2+ and Ultimaker 2 Extended series 3D printers.

This enclosure is made separate of Ultimaker by U3DPS to provide users with a state-of-the-art enclosure and optional filtration system that not only maintains internal thermal conditions and prevents fumes from invading your workspace, but it adds an aesthetic element lacking from the machine by itself.

U3DPS designed this enclosure specifically for the Ultimaker brand, which is widely regarded as the world’s best FDM 3D printer, for a very simple reason: It completes your Ultimaker series printer.

None of the Ultimaker series 3D printers currently come with an enclosure, and anyone who works with one of these printers, especially in an enclosed environment, should have this enclosure, not only to protect the machine from outside contaminants, as well as their investment, and to maintain internal temperature, but also to keep their work environment free of fumes during the printing process.

U3DPS is proud to be the only company in the world manufacturing a safety enclosure for Ultimaker series 3D printers. If you see a safety enclosure for sale, and it does not include our exclusive 3DFS designation, then you are not buying an enclosure made exclusively by Ultimate 3D Printing Store for your Ultimaker series printer.