PA11 Onyx STARTER Powder
A polyamide powder (nylon) with superior thermal resistance, stable to light, UV, and weather.
Note: Sinterit products must be purchased from your regional distributor. See Ultimate 3D Printing Store's Sinterit Distribution region below. If you are not within this region, please reach out to Sinterit directly at email@example.com, or use Sinterit's contact form.
- high resistance against impacts
- moderate elasticity
- good chemical resistance
- dedicated only for LISA Pro (requires a nitrogen chamber)
- jigs, fixtures
- tools elements
- covers, housings, enclosures
- snap-fit designs
- handles, hinges, connectors
- impact-proof elements
- thermoforming molds
STARTER is suitable ONLY for first printing with PA11.
Comes in 6kg (12 liters) metal container.
- Manufacturer Sinterit
Granulation20 – 80 μm
Weight / Volume6 kg / 12 L / Metal container
Material typePA11 Nylon powder
Material refreshing ratio50 [%] – to reuse leftover PA11 powder add 50% of FRESH powder
|Category||Powder for SLS printing|
|Material type||Nylon 11|
|Granulation||20 – 80 [μm]|
|Elongation at Break||40 [%]|
|Tensile Strength||54 [MPa]|
|Shore hardnes in scale D||76|
|Material refreshing ratio||50 [%] – to reuse leftover PA11 powder add 50% of FRESH powder.|
|Dedicated for||Lisa Pro|
Ultimate 3D Printing Store's Sinterit Sales Region
The Ultimate 3D Printing Store can only sell Sinterit products within the following US States:
- South Carolina
If you are not within this region, please reach out to Sinterit directly at firstname.lastname@example.org, or use Sinterit's contact form.