Sinterit Dedicated Tool Set

$ 590.00

-
+
$ 590.00

Sinterit Dedicated Powder Tools

No mess, no waste

With this comprehensive set of powder tools, you will save both time and powder, while keeping your workspace nice and tidy. Since now, your on-print preparation could be twice as fast.

New powder tools cover the whole printing process, from the initial startup, through taking out the printouts, postprocessing, and cleaning, both the printouts and workspace. With the service kit, you get a 360° SLS printing experience. Now there is all you need to act professionally.

Note: Sinterit products must be purchased from your regional distributor. See Ultimate 3D Printing Store's Sinterit Distribution region below. If you are not within this region, please reach out to Sinterit directly at contact@sinterit.com, or use Sinterit's contact form.


LESS WASTE

CLEANER WORKSPACE

BETTER WORKFLOW

New powder tools were designed to keep the powder only where it should be, and nowhere else. It helps you save the powder. It is like getting a “cartridge” experience but with all benefits and elasticity of the independent powder management.

It never was so easy to recover all of the powder, without additional dust or dirt. A dedicated, foldable workspace makes it effortless: easy to clean, easy to store, and super easy to use.

Powder tools work hand in hand with the Sinterit SLS 3D printing ecosystem. It makes you work faster and smarter. Just take your powder bucket, attach the powder funnel to it and you are ready to powder in the printer. After printing and post-processing, clean the workspace using the ATEX vacuum cleaner and put the remaining powder back to the same powder bucket.

 

 

 

POWDER FUNNEL 

Simple solutions are often the best. We have tested countless powder-in systems, and we are sure that the Powder Funnel will give you the best results and versatility. It allows you to fill the printer without spraying the powder in the air. One more thing – Powder Funnel is compatible with the new powder container, Sinterit Sieve, and Powder Separator in the ATEX Vacuum Cleaner.

 

 

TROWEL

Sinterit Trowel isn’t a new device, but it was redesigned to fit the whole feed bed. Now the tamping process is faster and is done in just one move. This ensures uniform pressure distribution and proper powder density.

 

 

 

 

IO BOX

The IO box was initially designed to take out ready printouts. Now it has one more function. When you turn one of the parts upside down, it can be used as a guide to powder in the printer. It perfectly fits the feed bed so it secures the pyrometers and mechanical elements. All of the powder will fall only into the feed bed, and nowhere else.

 

 

 

FOLDABLE TRAY

It is not only foldable and light, so very easy to store but has an optimal workspace for initial post-processing. Most SLS 3D printing users don’t have dedicated, portable working space for “dirty work”, easy to bend, and clean. Foldable Tray is a perfect solution. You can easily vacuum it or just simply pour the powder into a bucket. 

 

 

SERVICE KIT

The attached service kit with all maintenance parts will keep your printer working for 1000 hours. Spare recoater cords, silicone oil, set of cleaning wipes, cotton cloths, and spare heaters supplies will make you prepared for any typical maintenance action.

 

 

Ultimate 3D Printing Store's Sinterit Sales Region

The Ultimate 3D Printing Store can only sell Sinterit products within the following US States:

  • Alabama
  • Florida
  • Georgia
  • South Carolina

If you are not within this region, please reach out to Sinterit directly at contact@sinterit.com, or use Sinterit's contact form.


Recently Viewed Products