UltiMaker PVA Removal Station

$ 1,095.00

$ 1,095.00

Ultimaker PVA Removal Station

Simple post-processing. Faster parts

Note: Limited Stock. Will ship immediately.

Make printing complex designs faster and easier. The Ultimaker PVA Removal Station dissolves support material quickly and effectively, keeping operator time to a minimum and increasing productivity.

Rapid prototyping just got faster. And easier

Dissolves PVA up to 4x faster

Less post-processing operator time

Use with Ultimaker or 3rd-party PVA

Just add water. No chemicals, no mess

Ultimaker PVA removal

Remove PVA up to 4x faster

Shrink your post-processing time

High-speed water circulation driven by a magnetic rotor removes PVA up to four times faster than motionless water, even from hard-to-reach cavities. So you have your parts post-processed and ready to use as soon as possible.

Low effort, higher productivity

Reduce operator time up to 80%¹

The Ultimaker PVA Removal Station requires only a few minutes of operator time per print, with minimal maintenance needs. Just press the start button, leave it to do its job, and collect your print when it's ready.

Key features

Rotor powered PVA dissolve

Rotor-powered water circulation

Choose 100 or 225 RPM circulation depending on the fragility of your part. Every two minutes, the rotor changes direction to push water evenly against the model.

mess free PVA removal

Prints stay safe and submerged

A rinsing basket keeps your print in place and completely submerged while dissolving, then lifts up for mess-free draining and print removal.

Ultimaker PVA removal demo

Easy to monitor progress

A transparent, illuminated container lets you easily follow the PVA removal process and see when your part is ready. Plus, a saturation indicator shows when to refresh the water.

Your design-to-print workflow, simplified


Fill the container with tap water, place it back on the docking station, and place your 3D print inside.


Start the PVA removal process with the touch of a button. Let the PVA dissolve, typically within 1-8 hours², while you get on with your day

Remove and Repeat

Raise the basket and remove your print. Water can be safely disposed of down the drain³, then refilled ready for the next print

Using the PVA Removal Station in 3 easy steps

Post-processing made simpler

Technical specifications

Container volume 13.7 liters (3.6 US gal)
Maximum part size 200 x 230 x 165 mm
(7.8 x 9 x 6.4 in)
Supported materials Optimized for: PLA and PVA
Also suitable for: PETG, Tough PLA, Nylon, or CPE in combination with PVA
(Also supports equivalent third-party materials)
Supported solvents Water
Rotor speed 225 RPM (normal)
100 RPM (low)
Operating sound < 50 dBA
Dimensions 303 x 325 x 374 mm
(11.9 x 12.8 x 14.7 in)
Dimensions with handle extended 303 x 325 x 528 mm
(11.9 x 12.8 x 20.8 in)
Net weight 6.35 kg
(14 lbs)
Container weight (empty) 4.2 kg
(9.3 lbs)
Shipping box dimensions 400 x 400 x 500 mm
(15.7 x 15.7 x 19.7 in)
Shipping weight 8.5 kg
(18.7 lbs)
Operating ambient temperature 15 - 32 °C\
(59 - 90 °F)
Non-operating temperature 0 - 32 °C
(32 - 90 °F)
Relative humidity 10 - 90% RH non-condensing
Voltage 100 - 240 V AC
Frequency 50 - 60 Hz
Power 38 W
Warranty period 12 months
Expert support Market-leading technical support via email, phone, or from our global community is available to you in your language and timezone.
Extended support Online resources, extensive manuals, material technical and safety data sheets (in multiple languages), a detailed knowledge base, and much more.

Fill out my online form.

Recently Viewed Products