Bambu Lab Hotend with Nozzle

$ 9.99

Size
-
+
$ 9.99

Highlights of Various Nozzle Diameters

0.2mm Nozzle
Optimal Print Fineness

Extremely small layer gaps
More detailed on the vertical print surface

.2mm nozle highlights
.2mm vs .4mm

0.2mm Nozzle
Optimal Print Fineness

Smaller diameter extrudes thin filaments

High resolution on the horizontal print surface

0.6mm and 0.8mm Nozzle
Faster Print Speed

Larger diameter extrudes more filaments per second, resulting in faster print speed



bambu nozzle size comparison

The 0.4mm nozzle is widely recognized as the standard nozzle diameter for modern 3D printers due to its optimal balance between print quality and print speed. This nozzle size is utilized in both the Bambu Lab X1 Series and P1P 3D printers.



Filament Compatibility

Material 0.2 mm Nozzle 0.4 mm Nozzle 0.6 mm Nozzle 0.8 mm Nozzle Hardened Steel Required?
General PLA Yes Yes Yes Yes Optional
Wood/Rock/Metal-filled PLA * No Yes Yes Yes Optional
PETG Yes Yes Yes Yes Optional
PVA Yes Yes Yes Yes Optional
ABS Yes Yes Yes Yes Optional
ASA Yes Yes Yes Yes Optional
PC Yes Yes Yes Yes Optional
PA * No Yes Yes Yes Optional
TPU * No Yes Yes Yes Optional
PLA-CF * No * Highly Recommended Yes Yes * Required
PETG-CF * No * Highly Recommended Yes Yes * Required
PAHT-CF * No Yes * Highly Recommended Yes * Required
PET-CF * No Yes * Highly Recommended Yes * Required


[* Note]

  1. Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle.
  2. For filaments containing carbon fiber or glass fiber, it is highly recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion.
  3. Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mm nozzle, while also achieving higher print quality.

Configuration of Bambu Hotend

bambu hotend configuration

bambu hotend configuration 2

If you need to swap your nozzle, you can either replace the Hotend with Nozzle on your original complete hotend assembly or replace the whole Complete Hotend Assembly.

How-to Video



Compatibility

Bambu Lab X1 Series, P1P

In the Box

  • Hotend with Nozzle
  • Silicone Sock x1
  • Thermal Grease x1
  • M3-14 Step Screws x2

Product Specifications

  • Max Printing Temp: 300 ℃
  • Length: 47.3 mm

Manufacturer Number (.4mm Hardened Steel): FAH001-N-1

Manufacturer Number (.6mm Hardened Steel): FAH005-N-1

Manufacturer Number (.8mm Hardened Steel): FAH003-N-1

Manufacturer Number (.2mm Stainless Steel): FAH004-N-1

Manufacturer Number (.4mm Stainless Steel): FAH002-N-1


Recently Viewed Products