Bambu Lab PLA Glow
PLA Glow stands out due to its incorporation of a unique additive: luminous powder. This variant retains the familiar qualities of traditional PLA, including easy printing, high quality, and exceptional overall mechanical properties. What sets PLA Glow apart is its distinctive feature - it glows in the dark. This makes it the optimal selection for crafting luminous nameplates, logos, jewelry, and various models that require a captivating glow effect.
Product Features:
- Unique Glow in Low Light Conditions
- Includes Basic Reusable Spool
- Diameter: 1.75mm +/- 0.03mm
Precautions:
- AMS Compatible, but can lead to faster wear on internal components.
- AMS lite NOT Compatible
- 0.2 mm Nozzle Not Compatible
Note: A hardened nozzle is required when printing regularly
Unique Glow in Low Light Conditions
Bambu PLA Glow incorporates a distinct additive: luminous powder, which imparts a special property to printed objects, causing them to emit a captivating glow in the dark.
Accessory Compatibility
* It is not recommended to print Bambu PLA Glow and other glow-in-the-dark PLA filaments with AMS Lite. These filaments, being hard and rough, may cause feeding failures due to substantial feeding resistance.
RFID for Intelligent Printing
All printing parameters are embedded in RFID, which can be read through our AMS (Automatic Material System). Load and print! No more tedious setting steps.
Reccommended Settings
| Drying Settings (Blast Drying Oven): | 55 °C，8 hr |
| Printing and Keeping Container's Humidity: | < 20% RH (Sealed, with Desiccant) |
| Nozzle Temperature: | 190 - 230 °C |
| Bed Temperature (with Glue): | 35 - 45 °C |
| Printing Speed: | < 250 mm/s |
Physical Properties
| Density: | 1.26 g/cm³ |
| Vicat Softening Temperature: | 56 °C |
| Heat Deflection Temperature: | 55 °C |
| Melting Temperature: | 155 °C |
| Melt Index: | 23.3± 2.4 g/10 min |
Mechanical Properties
| Tensile Strength: | 32 ± 3 MPa |
| Breaking Elongation Rate: | 8.6 ± 1.2 % |
| Bending Modulus: | 2640 ± 130 MPa |
| Bending Strength: | 76 ± 4 MPa |
| Impact Strength: | 27.3 ± 2.2 kJ/m² |
Printing Tips
- Drying conditions: 55℃ for 8 hrs. Store in a dry environment after use. Dry before use if the material absorbs moisture.
- Printing with a 0.2 mm nozzle is not recommended; instead, it is advised to use a 0.4 mm nozzle for optimal results.
- The model's luminous intensity diminishes over time, but exposure to ultraviolet or sunlight for a brief period (approximately 2 hours) can rejuvenate its glow. However, prolonged or frequent irradiation may expedite PLA aging.
- Not suitable for AMS lite: Utilizing AMS lite may result in high feed resistance and an increased risk of feed failure. Consider alternative methods such as pre-use drying for better outcomes.
What's in the Box
Filament with Spool & Desiccant x 1
Package x 1
Manufacturer Number: A12-G0-1.75-1000-SPL