BOFA 3D PrintPRO 3 Fume Extractor
Fume Extraction System for Table Top Enclosed & Partially Enclosed 3D Printers
The BOFA 3D PrintPRO 3 incorporates externally mounted plenum system manifolds, which effectively captures fumes generated during the printing process and returns ultra clean, filtered air to the operator’s breathing zone.
The BOFA 3D PrintPRO 3 has the benefits of low cost, low power consumption and integral speed control. Each filtration unit is supplied with connection hoses and ‘print your own’ manifold instructions.
- Polymer powder bed fusion
- VAT polymerization
- Metal powder bed fusion / directed energy deposition
- Binder jetting
- Material jetting
- Fused Filament Fabrication (FFF)
- Blower with high airflow and pressure
- Low cost replacement filters
- Filter condition indicator
- Low noise levels
- Digital flow control system
Key Features & Benefits
BOFA uses mini pleat design HEPA (high efficiency particulate air) filters which are tested and certified to a minimum efficiency of 99.997% down to 0.3 microns and 95% as small as 0.1 micron. They incorporate a series of webbing between the pleated media. This feature not only guarantees even spacing for full filter coverage between each pleat, but also alleviates the possibility of airflow vibration or collapse.
Advanced Carbon Filter (ACF) Technology
ACF assures safe capture and removal of hazardous fumes. Contaminated air must remain in contact with the carbon bed for a period of time sufficient to ensure that no contaminants or odors are emitted (‘dwell time’). BOFA filters have been developed to capture all contaminants and odors, eliminating the risk of bypass and/or tunneling.
Multi Voltage Sensing (MVS) Unit
Automatically senses the local voltage and adjusts accordingly, between 100-230v.
ProTECT Service Plan
BOFA's ProTECT LEV service plan and compliance certification has been designed to give you the peace of mind that your LEV (Local Exhaust Ventilation) systems are being expertly maintained throughout their working life and you are kept within government guidelines and regulations established in the UK.
SureCHECK Quality Standard
BOFA recognizes that quality, health & safety, and environmental management are integral to BOFA's management. SureCHECK is far more than just written words, it touches every employee and is engrained within the company’s culture and business ethos. It is applied consistently across all of BOFA's business activities on a world-wide basis.
- BOFA 3D PrintPRO 3 Fume Extraction System
- 2x 50mm diameter hoses with cuffs, 2 meter length
- Articulating stay put arm
- Combined HEPA/Carbon Filter
- Power Cord
Print Your Own Extendable Manifolds
BOFA provides files for 3D printing your own manifolds free of charge. The two manifolds are designed to work with the 3D PrintPRO 2 and 3 extraction systems, to provide an air delivery system on one side of the 3D printer, and an air extraction system on the other.Print your own manifolds!
|400 x 290 x 300 mm
|15.75 x 11.42 x 11.81"
|Powder coated mild steel
|Airflow / Pressure
|120m³/hr / 20 mBar
|70 CFM / 20 mBar
|115v 60/50Hz Full load current: 1.3 amps
|< 57dBA (at typical operating speed)
|UKCA & CE
|Filter Media Construction
|96% @ 2 microns
|Combined Filter Specifications
|HEPA Filter Media
|HEPA Media Construction
|Maxi pleat construction with glue bead spacers
|Treated activated carbon
|Zintec Mild Steel
|99.997% @ 0.3 microns
Manufacturer's Part Number: 32361001-1597