Kimya PC-FR 3D Filament - 750 grams
The Kimya PC-FR is an amorphous thermoplastic that combines the advantages of a polycarbonate with flame retardant properties linked to the formulation. This low moisture sensitive filament has good dimensional stability, a wide operating temperature range (-80 to 105°C) with its high Tg and good impact resistance . All these properties make it suitable for a variety of demanding applications such as the production of parts in the railway and automotive sectors as well as in the electrical and electronic fields. The Kimya PC-FR 3D filament has the following properties:
- Good dimensional stability
- Wide usage temperature range (-80°C à +105°C)
- Flame retardant – EN45545 class R22/R23/R24/R26 HL3, class R1/R6 HL1, HL2, HL3
- Complies with the REACH and RoHS directive
- Product Dimensions: 20.7 × 20.5 × 6 cm; 1.1 kg
FILAMENT PROPERTIES
PROPERTIES |
TEST METHODS |
VALUES |
Diameter |
INS-6712 |
1.75 ± 0.1 mm |
Density |
ISO 1183-1 |
1.294 g/cm3 |
Moisture rate |
INS-6711 |
< 0.5 % |
Melt flow index (MFI) |
ISO 1133-1 (@260°C – 2.16 kg) |
5.1 g/10min |
Glass transition temperature (Tg) |
ISO 11357-1 DSC (10°C/min - 20-300°C) |
117 °C |
PRINT PARAMETERS AND SPECIMENS DIMENSIONS
PRINTING DIRECTION |
XY |
Printing Speed |
20-40 mm/s |
Infill |
100% - rectilinear |
Infill Angle |
45°/-45° |
Nozzle Temperature |
270-320°C |
Bed T° |
80-115°C |
PRINTED SPECIMENS PROPERTIES
|
PROPERTIES |
TEST METHODS |
VALUES |
THERMAL PROPERTIES |
Maximum use T° |
- |
105 °C |
MECHANICAL PROPERTIES |
Tensile modulus |
ISO 527-2/5A/50 |
2,680 MPa |
Tensile Strength |
ISO 527-2/5A/50 |
66.2 MPa |
Tensile strain at strength |
ISO 527-2/5A/50 |
3.1 % |
Tensile Stress at Break |
ISO 527-2/5A/50 |
66.4 MPa |
Tensile strain at break |
ISO 527-2/5A/50 |
3.1 % |
Flexural modulus |
ISO 178 |
2,230 MPa |
Deformation at Flexural Strain |
ISO 178 |
>5 % |
Flexural stress at conventional deflection (3,5% strain)* |
ISO 178 |
83.2 MPa |
Shore Hardness |
ISO 868 |
80,7D |
Note 1 |
*According to ISO 178, end of the test at 5% deformation even if there is no specimen break. |
Note 2 |
The data should be considered as indicative values - Properties can be influenced by production conditions. |