WANHAO BOXMAN - 1 - PROFESSIONAL CURING STATION FOR RESIN PRINTERS WANHAO BOXMAN - 1 - PROFESSIONAL CURING STATION FOR RESIN PRINTERS

$ 499.99 $ 429.00
-
+
$ 429.00
Add to wishlist

WANHAO CURING BOX

Expediting curing for Jewelry, print model and hobbist. WANHAO curing box, with LCD touch screen, and door. It can protect the user from ultraviolet radiation during the curing process. Yellow perspective screen can protect users' eyes while looking at the model.( Please do not watch it for a long time).The inner wall structure of the curing box and the optimized reflector can ensure cure effect. The curing box is equipped with four fans, which makes the system work in a good heat dissipation environment and increases the system stability.


WATER COOLING SYSTEM

Work in a good heat dissipation environment

ACCESS TO THE HIGH QUALITY OF CURE

Model Display Preferred

ENSURE CURE EFFECT

Reflective inner wall and emitting area up to 32*20*20CM

LCD TOUCH SCREEN

Easy to operate


 

 

WANHAO BOXMAN-1

The UV device outputs steady, focused and consistent UV lights to cure the printouts printed with photopolymer resins in a short period. The post curing process increases the hardness and durability of the printed products

Safety Guidelines

- Read and follow all instructions.

• Follow all safety rules in this section and heed all cautions and warnings in this guide

• Do not attempt to open the chamber door while a part job is running

• Do not use any material without first reviewing its Material Safety Data Sheet (MSDS).

• Dress power and communication cables at the back of the ProCure UV Chamber to prevent tripping.

• Do not attempt to access, service, or adjust the internal machine components.

• Do not use this equipment in a manner that is not specified by the manufacturer

 Resin Safety

• Do not use any resins without reviewing the Material Safety Data Sheets (MSDS).

• Wearing contact lenses when working with resins is not recommended.

• Always wear chemical-resistant gloves whenever handling partially cured parts. Recommended gloves are 100% Nitrile. Do not wear latex gloves.

• Always work in a well ventilated area when using resins. Avoid breathing vapors.

• Avoid getting resin on your skin. If you get resin on your skin, first rinse all of the resin off the area with cold water only. After thoroughly rinsing your skin, wash the area with soap and COLD water. DO NOT USE HOT WATER OR SOLVENTS to clean your skin as it will result in absorption through the skin. 

 

 

***SHIPS FROM OUR CHINA WAREHOUSE! ARRIVES WITHIN 7-9 BUSINESS DAYS***


Technical Specifications:

Brand Name

WANHAO UV led curing box

Light Source

UV

Power (W)

200W

Voltage

24V

Net Weight

14.5KG

Wavelength

405nm

Dimension (L*W*H)

43*30*35cm

Emitting Area (L*W*H)

32*20*20cm

Touch LCD screen (L*W)

57.6*43.2mm

Fan size (L*W*H)

85*85*10mm

Certificaton

CE, FCC

Usage

Curing print model

Perspective screen (L*W)

15*6cm

Bulb warranty

2000 hours

Typical application

- A perfect printer for educators who intend to use the printers in technical education.

-Great printer for DIY hobbist

 

WANHAO BOXMAN - 1 - PROFESSIONAL CURING STATION FOR RESIN PRINTERSWANHAO BOXMAN - 1 - PROFESSIONAL CURING STATION FOR RESIN PRINTERSWANHAO BOXMAN - 1 - PROFESSIONAL CURING STATION FOR RESIN PRINTERSWANHAO BOXMAN - 1 - PROFESSIONAL CURING STATION FOR RESIN PRINTERSWANHAO BOXMAN - 1 - PROFESSIONAL CURING STATION FOR RESIN PRINTERSWANHAO BOXMAN - 1 - PROFESSIONAL CURING STATION FOR RESIN PRINTERS

 

 

 

 

 

WANHAO CURING BOX

Expediting curing for Jewelry, print model and hobbist. WANHAO curing box, with LCD touch screen, and door. It can protect the user from ultraviolet radiation during the curing process. Yellow perspective screen can protect users' eyes while looking at the model.( Please do not watch it for a long time).The inner wall structure of the curing box and the optimized reflector can ensure cure effect. The curing box is equipped with four fans, which makes the system work in a good heat dissipation environment and increases the system stability.


WATER COOLING SYSTEM

Work in a good heat dissipation environment

ACCESS TO THE HIGH QUALITY OF CURE

Model Display Preferred

ENSURE CURE EFFECT

Reflective inner wall and emitting area up to 32*20*20CM

LCD TOUCH SCREEN

Easy to operate


 

 

WANHAO BOXMAN-1

The UV device outputs steady, focused and consistent UV lights to cure the printouts printed with photopolymer resins in a short period. The post curing process increases the hardness and durability of the printed products

Safety Guidelines

- Read and follow all instructions.

• Follow all safety rules in this section and heed all cautions and warnings in this guide

• Do not attempt to open the chamber door while a part job is running

• Do not use any material without first reviewing its Material Safety Data Sheet (MSDS).

• Dress power and communication cables at the back of the ProCure UV Chamber to prevent tripping.

• Do not attempt to access, service, or adjust the internal machine components.

• Do not use this equipment in a manner that is not specified by the manufacturer

 Resin Safety

• Do not use any resins without reviewing the Material Safety Data Sheets (MSDS).

• Wearing contact lenses when working with resins is not recommended.

• Always wear chemical-resistant gloves whenever handling partially cured parts. Recommended gloves are 100% Nitrile. Do not wear latex gloves.

• Always work in a well ventilated area when using resins. Avoid breathing vapors.

• Avoid getting resin on your skin. If you get resin on your skin, first rinse all of the resin off the area with cold water only. After thoroughly rinsing your skin, wash the area with soap and COLD water. DO NOT USE HOT WATER OR SOLVENTS to clean your skin as it will result in absorption through the skin. 

 

 

***SHIPS FROM OUR CHINA WAREHOUSE! ARRIVES WITHIN 7-9 BUSINESS DAYS***


Technical Specifications:

Brand Name

WANHAO UV led curing box

Light Source

UV

Power (W)

200W

Voltage

24V

Net Weight

14.5KG

Wavelength

405nm

Dimension (L*W*H)

43*30*35cm

Emitting Area (L*W*H)

32*20*20cm

Touch LCD screen (L*W)

57.6*43.2mm

Fan size (L*W*H)

85*85*10mm

Certificaton

CE, FCC

Usage

Curing print model

Perspective screen (L*W)

15*6cm

Bulb warranty

2000 hours

Typical application

- A perfect printer for educators who intend to use the printers in technical education.

-Great printer for DIY hobbist

 

WANHAO BOXMAN - 1 - PROFESSIONAL CURING STATION FOR RESIN PRINTERSWANHAO BOXMAN - 1 - PROFESSIONAL CURING STATION FOR RESIN PRINTERSWANHAO BOXMAN - 1 - PROFESSIONAL CURING STATION FOR RESIN PRINTERSWANHAO BOXMAN - 1 - PROFESSIONAL CURING STATION FOR RESIN PRINTERSWANHAO BOXMAN - 1 - PROFESSIONAL CURING STATION FOR RESIN PRINTERSWANHAO BOXMAN - 1 - PROFESSIONAL CURING STATION FOR RESIN PRINTERS

 

 

 

 

 

Recently Viewed Products Recently Viewed Products