Sinterit ATEX Vacuum Cleaner and Cyclone Powder Separator
Note: Sinterit products must be purchased from your regional distributor. See Ultimate 3D Printing Store's Sinterit Distribution region below. If you are not within this region, please reach out to Sinterit directly at firstname.lastname@example.org, or use Sinterit's contact form.
A perfect solution for efficient collecting and cleaning unsintered powder. The compact dimensions of the device along with high collection capacity is crucial if you have limited space. Along with the cyclone separator it will make your workflow much faster and easier.
It separates the powder from flowing air and puts it into a dedicated container.
This separator is designed especially for SLS and Sinterit’s printers – this highly effective separator helps you recover all of the unsintered powder and use it again in the next print job. All unsintered powder from the print can be put into a dedicated 12L container. Then the vacuum can be used in a traditional way to clean the workspace.
Clean your printer and collect the unused powder in 10 minutes. Save time and money.
Save time and money. Make your printer ready for a next print in less than 10 minutes. With the cyclone separator you can use the ATEX Vacuum not only for cleaning, but also to collect all the unsintered powder in a dedicated container and quickly prepare it for a next print.
With the ATEX Vacuum Cleaner you can clean your workspace with a few simple moves.
Eliminate the mess in your workplace and recover 100% of powder. With the ATEX Vacuum you can gather the powder spilled during the printout cleaning – both from the workshop and form the printout surface. In 100% safe way.
EASY POWDER RECOVERY
Minimize your workflow: collect the powder and clean your workspace with one device.
With the help of Sinterit separator, collected powder is automatically put into the dedicated container, without the need of manual transfering. Afterwards it can be easily poured into the Sinterit Sieve, or just closed and left for further processing.
|Dimensions||440 x 420 x 780 [mm] (17.3 x 16.5 x 30.7 [in])|
|Total weight||25 [kg] (55 [lbs])|
|Voltage||230 [V] AC, 50/60 [Hz] or 110 [V] AC 50/60 [Hz]|
|Noise level||(EN ISO 3744) 77 [dB(A)]|
|Max. air flow (rate)||215 [m3/h]|
|Suction inlet||50 [mm]|
|Filter type||Star, M class filtration|
|Capacity of the collection unit||40 L|
|ATEX zones||Z22 or INTERTEK certification|
|Package contents||ATEX Vacuum Cleaner + set of accessories + powder separator + manuals|
|Dimensions||550 x 305 x 300 mm (21,7 x 12 x 11,8 in)|
|Total weight||5 kg (11 lbs)|
|Max. air flow rate||215 m3/h|
|Suction inlet||32 mm (1.3 in)|
|Capacity of collection unit||12 L|
|Package contents||Sinterit Separator + set of accessories|
Ultimate 3D Printing Store's Sinterit Sales Region
The Ultimate 3D Printing Store can only sell Sinterit products within the following US States:
- South Carolina
If you are not within this region, please reach out to Sinterit directly at email@example.com, or use Sinterit's contact form.