Kodak HIPS Filament - 750g Kodak HIPS Filament - 750g

$ 24.99

TYPE
DIAMETER
-
+
$ 24.99
Add to wishlist

Introducing Kodak HIPS Filament

HIPS is as easy to print as ABS, although much less likely to warp, which makes it another great alternative to classic PLA for models requiring higher impact resistance. It works as a great dissolvable support material because it is easily removed with a limonene solution. The material is a good electrical insulator, which can be sanded and painted with acrylic paints.

This polymer complies with section 201(s) of the US Federal, Drug, and Cosmetic Act, and Parts 182, 184 and 186 of the Food Additive Regulations.


Benefits

A filament with some of the best characteristics of PLA and ABS
High-resolution smooth surfaces
Great interlayer adhesion
Resistance to shattering, low warp
It can be used as a dissolvable support material for ABS (soluble with limonene, citric acid)
Recommended Print Settings
Print temperature: 220-260C
Print bed temperature: 100-105C
Cooling fans: On
Closed environment: Not required

Tolerance

1.75MM
+/- 0.02mm diameter
99% roundness accuracy
<0.02% moisture content

2.85MM
+/- 0.03mm diameter
99% roundness accuracy
<0.02% moisture content


Physical Properties

Density: 1.04 g/cm3 (Test method: ISO 1183/B)
Melt Mass-Flow Rate (MFR) (200C/21.6kg): 3 g/10 min (Test method: ASTM 1238)

Introducing Kodak HIPS Filament

HIPS is as easy to print as ABS, although much less likely to warp, which makes it another great alternative to classic PLA for models requiring higher impact resistance. It works as a great dissolvable support material because it is easily removed with a limonene solution. The material is a good electrical insulator, which can be sanded and painted with acrylic paints.

This polymer complies with section 201(s) of the US Federal, Drug, and Cosmetic Act, and Parts 182, 184 and 186 of the Food Additive Regulations.


Benefits

A filament with some of the best characteristics of PLA and ABS
High-resolution smooth surfaces
Great interlayer adhesion
Resistance to shattering, low warp
It can be used as a dissolvable support material for ABS (soluble with limonene, citric acid)
Recommended Print Settings
Print temperature: 220-260C
Print bed temperature: 100-105C
Cooling fans: On
Closed environment: Not required

Tolerance

1.75MM
+/- 0.02mm diameter
99% roundness accuracy
<0.02% moisture content

2.85MM
+/- 0.03mm diameter
99% roundness accuracy
<0.02% moisture content


Physical Properties

Density: 1.04 g/cm3 (Test method: ISO 1183/B)
Melt Mass-Flow Rate (MFR) (200C/21.6kg): 3 g/10 min (Test method: ASTM 1238)

Recently Viewed Products Recently Viewed Products

Liquid error: Could not find asset snippets/zopim.liquid