KIMYA PEKK Carbon Filament

$ 524.60

-
+
$ 524.60

KIMYA PEKK Carbon Filament - 500 grams

The Kimya PEKK Carbon 3D filament belongs to the polyaryletherketone family. Polyetherketoneketone (PEKK) is a thermoplastic polymer reinforced with carbon fiber. This combination gives it a high level of rigidity and heat-resistance. It can be used as a material in components exposed to acids and hydrocarbons, such as fuel and lubricants, and also to produce components located in engine housings. The Kimya PEKK Carbon 3D filament has the following properties:

  • Temperature resistance
  • Reinforced with carbon fiber
  • Complies with the REACH standard
  • Product Dimensions: 20.7 × 20.5 × 6 cm; 0.8 kg

FILAMENT PROPERTIES

PROPERTIES TEST METHODS VALUES
Diameter INS-6712 1.75 ± 0.1 mm
2.85 ± 0.1 mm
Density ISO 1183-1 1.27 g/cm3
Moisture rate INS-6711 < 1 %
Glass transition temperature (Tg) ISO 11357-1 DSC (10°C/min - 20-410°C) 160 °C

PRINT PARAMETERS AND SPECIMENS DIMENSIONS

PRINTING DIRECTION XY
Printing Speed 20-40 mm/s
Infill 100% - rectilinear
Infill Angle 45°/-45°
Nozzle Temperature 350-390°C
Bed T° 110-150°C

PRINTED SPECIMENS PROPERTIES

PROPERTIES TEST METHODS VALUES
THERMAL PROPERTIES Maximum use T° - 150 °C
ELECTRICAL PROPERTIES Dielectric strength IEC 60243-1 (100µm) 84 KV/mm
Surface resistivity ASTM D257 1016 Ohms/m²
MECHANICAL PROPERTIES Tensile modulus ISO 527 2,900 MPa
Tensile Strength ISO 527 39.1 MPa
Tensile strain at break ISO 527 3 %
Flexural modulus ISO 178 2,924 MPa
Flexural strength* ISO 178 85.9 %
Charpy impact resistance ISO 179-1/1eA 5 kJ/m²
Note 1 *According to ISO 178, end of the test at 5% deformation even if there is no specimen break.
Note 2 The data should be considered as indicative values - Properties can be influenced by production conditions.

Recently Viewed Products