Grey - monocure rapid 3D resin 1 liter - from monocure resin Grey - monocure rapid 3D resin 1 liter - from monocure resin

$ 79.99

-
+
$ 79.99
Add to wishlist

DESCRIPTION

Our RAPID product range is designed for low powered LED DLP type printers such as the Wanhao Duplicator 7. The cure speed is up to 4 X faster than our standard resin. Grey is the perfect & highly recommended colour for photographing your 3D prints. The solid grey appearance allows you to 3D print models or parts with a detailed smooth finish that will be grey in colour when cured.



TECHNICAL DATA

All Monocure 3D resins have a very wide range of reactivity, UV wavelengths of 225nm to wavelengths of 420nm. By incorporating a blend of photo-initiators, monomers & sensitizers, almost any UV light source can be used to initiate the polymerisation process of our resins.

Our resins have been tested with a 'Shore D Hardness Durometer' and have a rating of 70. (A hard hat has a rating of 80)

The Viscosity of our resin is 500 - 600cps @ 25°C (Brookfield RVT). 

All our resins have a low odour, have zero VOC emissions and display very low shrinkage properties <0.5%>

Please store Monocure 3D resin in a dark, cool place out of direct sunlight. 

Click here to download Grey Resin - RAPID (3DR3588GY) Data Sheet 


SDS

Material Safety Data Sheets (MSDS)

 

Resin Porfile for Phrozen Shuffle: Click here

 

DESCRIPTION

Our RAPID product range is designed for low powered LED DLP type printers such as the Wanhao Duplicator 7. The cure speed is up to 4 X faster than our standard resin. Grey is the perfect & highly recommended colour for photographing your 3D prints. The solid grey appearance allows you to 3D print models or parts with a detailed smooth finish that will be grey in colour when cured.



TECHNICAL DATA

All Monocure 3D resins have a very wide range of reactivity, UV wavelengths of 225nm to wavelengths of 420nm. By incorporating a blend of photo-initiators, monomers & sensitizers, almost any UV light source can be used to initiate the polymerisation process of our resins.

Our resins have been tested with a 'Shore D Hardness Durometer' and have a rating of 70. (A hard hat has a rating of 80)

The Viscosity of our resin is 500 - 600cps @ 25°C (Brookfield RVT). 

All our resins have a low odour, have zero VOC emissions and display very low shrinkage properties <0.5%>

Please store Monocure 3D resin in a dark, cool place out of direct sunlight. 

Click here to download Grey Resin - RAPID (3DR3588GY) Data Sheet 


SDS

Material Safety Data Sheets (MSDS)

 

Resin Porfile for Phrozen Shuffle: Click here

 

Recently Viewed Products Recently Viewed Products