GERMAN REPRAP - X400 PRO V3 - 3D PRINTER GERMAN REPRAP - X400 PRO V3 - 3D PRINTER

$ 9,999.00
-
+
$ 9,999.00
Add to wishlist

The X400 PRO V3 is an industry-proven 3D printer "Made in Germany", which has proven its reliability and precision in many demanding prototypes. In the third generation, the X400 V3 combines the advanced development with technical improvements for even higher print quality and even greater material selection. These include the newly developed heating bed and the standard DD3 dual extruder. The X400 PRO V3 is thus a tried-and-tested device in practice, which has an unbeatable price / performance ratio in terms of the space available and technical features at a price.

Large print bed
With its print bed of 350 x 400 mm and a possible height of 320 mm *, the X400 PRO V3 offers the best conditions for large print objects with 0.1 mm layer resolution.

Simplify3D SoftwareIcon_Software
The included software Simplify 3D contains all necessary features to produce objects in industrial quality. Individual parameter settings, which can be adapted to the object geometry, allow full control over the printing process. The software allows the use of dual extruders, for printing different materials and colors as well as the multiple placement of different objects in the print space. Likewise, different areas of a single component can be defined and printed with different parameters.

Printing with two print heads
The X400 PRO V3 comes standard with two DD3 extruders. This makes the advanced extruder technology available as standard for two print heads. The German RepRap developed DD3 extruder with two print heads allows printing in two colors or with water-soluble support material such as PVA for PLA or HIPS for ABS parts. The extruder can be heated to 290 ° C. and thus provides flexibility in the selection of materials.

Innovative extruder technology
The X400 PRO V3 works with our latest drive technology, the DD3 extruder. The DD3 extruder and full-metal tip are easy to use. The highlights: no more readjustment and a variable contact pressure for soft materials. Large nozzle selection.


The optimized version of the X400 is characterized by an adhesion-optimized print bed. This was achieved by a new heating bed design, which has an even heat distribution. This has a positive effect on the adhesion of the print objects on the pressure bed.

Precision in continuous operation
The basic construction of the X400 PRO V3 is stable and low-play, for maximum reduced vibrations and vibrations. The X400 PRO V3 has been extended by aluminum milling parts for the Y-Pulley, which is now double-mounted. This ensures a more precise running of the belt pulley and thus contributes to the improvement of the printer results.

Ease of maintenance Quality
components and low-wear materials make the X400 PRO V3 a long-lasting device, designed for industrial durability. The consistent focus on an open-source architecture serves to protect investment and offers openness to new developments.

Stand-alone Printing
The X400 PRO V3 can be operated via an LCD display with an SD card reader. Optionally, a network connection such as Ethernet and Wifi, as well as a browser-based control and pressure monitoring via Web-cam is possible.

The X400 PRO V3 is manufactured in Germany with high-quality industrial components.

 

model

X400 PRO V3

Pressure space * (XxYxZ)

350 x 400 x 320 mm

Printing speed

10 - 150 mm / s

Travel speed

10 - 300 mm / s

Positioning accuracy (X / Y)

+/- 0.1 mm

Layer thickness (minimum)

0.1 mm

Filament / nozzle diameter (standard)

1.75 mm / 0.4 mm

Material*

ABS, PLA, PS, PVA, TPU93, Carbon20, Laywood, Laybrick, PP, Bendlay, Soft-PLA, SmartABS

Extruder type

DD3 Dual

Extruder temperature (max)

290 ° C

Pressure bed technology

Heatable

File transfer

LC display with SD card reader, USB, WLAN and Ethernet optional

Software equipment

Repetier, Slic3r, Simplify3D software

Power consumption (max)

600 W

Operating voltage *

115 / 230V

Ambient temperature

15-26 ° C

Outside dimensions approx. (WxDxH)

700 x 700 x 700 mm

Weight approx.

55 kg

identification

DIN 10218-2

Options

Closet, ~ 1m height (can be cut)

Available nozzles

0.25 / 0.3 / 0.35 / 0.5 / 0.6 / 0.8

Available nozzle material

Brass, hardened steel

technology

FFF (Fused Filament Fabrication)

 

Upgrade &Accessories 

3DPrintBox

The 3DPrintBox makes the 3D printer network-compatible. The memory integrated in the 3DPrintBox can be printed without a computer connection. Optionally, a webcam for pressure monitoring can be connected.

English RepRap DD3 ExtruderDD3 extruder

Our new extruder technology for the X400 as a single and dual extruder.

German RepRap E3D nozzlesNozzles for the E3D tip

E3D nozzles of hardened steel or brass for the DD3 extruder.

German RapRap Carbon Platen X 400 3D printerVarious printing plates

Pressure plates improve the adhesion of the model during printing and facilitate the work with certain filaments. A pressure plate made of carbon eliminates, for example, the tedious gluing of the pressure bed. Due to the flexible material, the print objects can also easily peel off again.

German RepRap Reference Customer Popp Group

Medizintechnik / Prototyping
Prototyping Windmill for nuclear spin tomographs

Popp Group uses the X400 3D printer in the prototyping of windings for nuclear spin tomographs [...]

German RepRap Reference customer Pazulla

Automobile construction / prototyping Door
trim from the X400 3D printer

Automobile designer Thomas Pazulla switches to 3D printing with PLA during prototyping from laser sintering. [...]


English RepRap Reference Customer Lindner Group

Mold making
Lindner Group prints in 3D before building

The Lindner Group, Europe's leading specialist in the field of interior design, façade construction and insulation technology, makes a great experience with the German RepRap X400 3D printer in the design phase and for small series production. [...]

German RepRap Reference Customer Popp Group

Furniture / prototyping
Popp Group prints complete door hinges with the 3D printer
with 3D-printed door hinges supported the Popp Group, Forchheim, its customers in the medical technology, wanted as part of a cost-down procedure reduce the cost of manufacturing equipment cabinets. [...]

German RepRap Reference Customer Anita

Mold
3D printing reduces in Anita Dr. Helbig GmbH 50% of the cost
, the manufacturer of breast prosthesis prints for its ever-changing tools casting cores X400 of German RepRap. [...]


Carl GmbH Copper Sheet Gusskern_X400

Mold
Carl GmbH reduced with 3D printing manufacturing costs

Carl GmbH produces manufacturing systems for distillery, distillation and brewing and uses a German RepRap X400 3D printer for the production of casting cores. [...]

 

 


The X400 PRO V3 is an industry-proven 3D printer "Made in Germany", which has proven its reliability and precision in many demanding prototypes. In the third generation, the X400 V3 combines the advanced development with technical improvements for even higher print quality and even greater material selection. These include the newly developed heating bed and the standard DD3 dual extruder. The X400 PRO V3 is thus a tried-and-tested device in practice, which has an unbeatable price / performance ratio in terms of the space available and technical features at a price.

Large print bed
With its print bed of 350 x 400 mm and a possible height of 320 mm *, the X400 PRO V3 offers the best conditions for large print objects with 0.1 mm layer resolution.

Simplify3D SoftwareIcon_Software
The included software Simplify 3D contains all necessary features to produce objects in industrial quality. Individual parameter settings, which can be adapted to the object geometry, allow full control over the printing process. The software allows the use of dual extruders, for printing different materials and colors as well as the multiple placement of different objects in the print space. Likewise, different areas of a single component can be defined and printed with different parameters.

Printing with two print heads
The X400 PRO V3 comes standard with two DD3 extruders. This makes the advanced extruder technology available as standard for two print heads. The German RepRap developed DD3 extruder with two print heads allows printing in two colors or with water-soluble support material such as PVA for PLA or HIPS for ABS parts. The extruder can be heated to 290 ° C. and thus provides flexibility in the selection of materials.

Innovative extruder technology
The X400 PRO V3 works with our latest drive technology, the DD3 extruder. The DD3 extruder and full-metal tip are easy to use. The highlights: no more readjustment and a variable contact pressure for soft materials. Large nozzle selection.


The optimized version of the X400 is characterized by an adhesion-optimized print bed. This was achieved by a new heating bed design, which has an even heat distribution. This has a positive effect on the adhesion of the print objects on the pressure bed.

Precision in continuous operation
The basic construction of the X400 PRO V3 is stable and low-play, for maximum reduced vibrations and vibrations. The X400 PRO V3 has been extended by aluminum milling parts for the Y-Pulley, which is now double-mounted. This ensures a more precise running of the belt pulley and thus contributes to the improvement of the printer results.

Ease of maintenance Quality
components and low-wear materials make the X400 PRO V3 a long-lasting device, designed for industrial durability. The consistent focus on an open-source architecture serves to protect investment and offers openness to new developments.

Stand-alone Printing
The X400 PRO V3 can be operated via an LCD display with an SD card reader. Optionally, a network connection such as Ethernet and Wifi, as well as a browser-based control and pressure monitoring via Web-cam is possible.

The X400 PRO V3 is manufactured in Germany with high-quality industrial components.

 

model

X400 PRO V3

Pressure space * (XxYxZ)

350 x 400 x 320 mm

Printing speed

10 - 150 mm / s

Travel speed

10 - 300 mm / s

Positioning accuracy (X / Y)

+/- 0.1 mm

Layer thickness (minimum)

0.1 mm

Filament / nozzle diameter (standard)

1.75 mm / 0.4 mm

Material*

ABS, PLA, PS, PVA, TPU93, Carbon20, Laywood, Laybrick, PP, Bendlay, Soft-PLA, SmartABS

Extruder type

DD3 Dual

Extruder temperature (max)

290 ° C

Pressure bed technology

Heatable

File transfer

LC display with SD card reader, USB, WLAN and Ethernet optional

Software equipment

Repetier, Slic3r, Simplify3D software

Power consumption (max)

600 W

Operating voltage *

115 / 230V

Ambient temperature

15-26 ° C

Outside dimensions approx. (WxDxH)

700 x 700 x 700 mm

Weight approx.

55 kg

identification

DIN 10218-2

Options

Closet, ~ 1m height (can be cut)

Available nozzles

0.25 / 0.3 / 0.35 / 0.5 / 0.6 / 0.8

Available nozzle material

Brass, hardened steel

technology

FFF (Fused Filament Fabrication)

 

Upgrade &Accessories 

3DPrintBox

The 3DPrintBox makes the 3D printer network-compatible. The memory integrated in the 3DPrintBox can be printed without a computer connection. Optionally, a webcam for pressure monitoring can be connected.

English RepRap DD3 ExtruderDD3 extruder

Our new extruder technology for the X400 as a single and dual extruder.

German RepRap E3D nozzlesNozzles for the E3D tip

E3D nozzles of hardened steel or brass for the DD3 extruder.

German RapRap Carbon Platen X 400 3D printerVarious printing plates

Pressure plates improve the adhesion of the model during printing and facilitate the work with certain filaments. A pressure plate made of carbon eliminates, for example, the tedious gluing of the pressure bed. Due to the flexible material, the print objects can also easily peel off again.

German RepRap Reference Customer Popp Group

Medizintechnik / Prototyping
Prototyping Windmill for nuclear spin tomographs

Popp Group uses the X400 3D printer in the prototyping of windings for nuclear spin tomographs [...]

German RepRap Reference customer Pazulla

Automobile construction / prototyping Door
trim from the X400 3D printer

Automobile designer Thomas Pazulla switches to 3D printing with PLA during prototyping from laser sintering. [...]


English RepRap Reference Customer Lindner Group

Mold making
Lindner Group prints in 3D before building

The Lindner Group, Europe's leading specialist in the field of interior design, façade construction and insulation technology, makes a great experience with the German RepRap X400 3D printer in the design phase and for small series production. [...]

German RepRap Reference Customer Popp Group

Furniture / prototyping
Popp Group prints complete door hinges with the 3D printer
with 3D-printed door hinges supported the Popp Group, Forchheim, its customers in the medical technology, wanted as part of a cost-down procedure reduce the cost of manufacturing equipment cabinets. [...]

German RepRap Reference Customer Anita

Mold
3D printing reduces in Anita Dr. Helbig GmbH 50% of the cost
, the manufacturer of breast prosthesis prints for its ever-changing tools casting cores X400 of German RepRap. [...]


Carl GmbH Copper Sheet Gusskern_X400

Mold
Carl GmbH reduced with 3D printing manufacturing costs

Carl GmbH produces manufacturing systems for distillery, distillation and brewing and uses a German RepRap X400 3D printer for the production of casting cores. [...]

 

 


Recently Viewed Products Recently Viewed Products