Flexion Extruder -Dual Extruder Kit - High-Temp - From Ultimate 3D Printing Store

$ 309.00 $ 279.00
-
+
$ 279.00
Add to wishlist

Flexion extruder retrofit kit for dual extruder

Developed by the inventor of Ninjaflex
Flexible filament extruder retrofit kit for both left and right sides of a dual-extruder printer. Print fast with flexible materials, higher resolution, and fewer failures. Also prints ABS and PLA better than your stock extruder.

*Does not include stepper motor.

High Temp 

Only works with 1.75mm Filament.

Developed by the inventor of Ninjaflex

*Does not include stepper motor.

Product Description

3D printer extruder retrofit kit for dual-extruder direct-drive machines, such as the Flashforge Creator Pro, QiDi Tech, Powerspec Ultra, Malyan M180, and Makerbot Replicator 2X. The Flexion extruder will allow full-speed printing of flexible filaments and improved accuracy printing with PLA and ABS. The precision machined components allow your printer to push on filament harder, achieve high pressure in the nozzle, and control of feed rates very closely. The self-cleaning drive will keep your long prints from failing due to a clogged drive. Works will with Ninjaflex, Filaflex, flexible PLA, TPU, TPE ultra-flexible filament down to 50 Shore A, and all the standard rigid filaments like ABS and PLA.

howitworks3

The Flexion Extruder uses a high-stiffness lever to compress the filament. The compression is controlled with a cam and an adjust screw, rather than the traditional spring. This allows more tension and more precise control of the tension. To learn more about the benefits and drawbacks of this system, please read our blog post about it.

This kit requires you to disassemble your printer’s extruder and reinstall this upgrade. Detailed instructions on this process can be found on our support page.

 

Additional Information

Works with

Flashforge Creator, Monoprice Dual, Dremel, Wanhao 4S, Powerspec Ultra, and many others

Includes

Mounting block
2x Tensioning arm with idler and cleaning brush (one right and one left)
2x Adjustment cam
2x Drive gear
2x Feed barrel
2x Heater block
2x Insulation for heater block
8 nozzles – 2 each 0.2, 0.3, 0.4, 0.5 mm orifice
2x Adapter shim to allow 6mm and 0.25″ heater cartridges
4 PTFE feed tubes
2 spare cleaning brushes
All mounting hardware
6mm and 7mm wrench for installing nozzles
“Flexion inside” quick-guide sticker

Note: does not include stepper motor or motor mounting screws

Recently Viewed Products