Home / Dremel - 3D40 - education bundle - 3D printer Dremel - 3D40 - education bundle - 3D printer
Dremel - 3D40 - education bundle - 3D printer - Ultimate 3D Printing Store

Dremel - 3D40 - education bundle - 3D printer Dremel - 3D40 - education bundle - 3D printer

$ 1,699.00

-
+
$ 1,699.00
Add to wishlist



Each Dremel 3D40 FLEX EDU 3D Printer Bundle Includes

- 3D40 FLEX 3D Printer

- USB Flash Drive

- 4-hour professional development course

- (5) Flexible Build Plates

- (4) Spools of PLA Filament (500g)

- (1) Extra Build Sheet

- Instruction Manual

- Quick Start Guide

- Unclog Tool

- USB Cable

- Power Cable

Unsurpassed Reliability, Flexible Build Plate
The new Dremel 3D40 3D printer, equipped with Dremel's clog resistant extruder and active filament monitoring, is engineered to run smoothly. Spend your time making, not repairing.

The 3D40 also comes with a new, removable flexible build plate that makes print removal quick and easy. Using magnet and latches to hold the build plate in place, no tools are required. Ergonomic handles make build plate removal and flexing comfortable and easy. This model does not have a heated bed, so it is intended for printing Dremel PLA only.

 

 

 

Technical Advancements
Up to 30% Faster Printing
New “draft mode” print profile in the slicing software prints parts up to 30% faster than the Dremel 3D40 at 340 micron layer height

Up to 50 micron print resolution
New “ultra high quality” print profile slicing software prints parts at 50 micron layer height, perfect for parts with intricate features and fine details.

Certified Safety, Easy Connectivity
WiFi Enabled for Cloud Printing
Wifi-enabled and part of the Dremel Print Cloud for fast remote printing and monitoring.

UL-Certified
3D40 FLEX is UL-Certified, providing users peace of mind to focus on creativity - UL Standard: US-29813-M1-UL

 Calculated Reliability, Automatic Leveling
Automatic 9 Point Calibration
Automatic 9 point calibration before every print helps parts stick to the build plate and prevent clogs.

Semi-Automated Leveling
Guided 2-point semi automated leveling allows for effortless, accurate calibrations and easy set up. The touch screen shows you in real time how to precisely level the plate with just the turn of a knob.

 

 

 

    Technical Specs

    Printing Technology

    Fused Deposition Modeling

    Extruder

    Direct Drive

    Single Extruder

    Build Volume

    10 x 6 x 6.7in

    402 cubic inches

    Z-Layer Resolution

    100-300 microns

    Materials

    PLA

    Filament Diameter

    1.75mm (0.069 in)

    Nozzle Diameter

    0.4mm (0.014 in)

    Print File Type

    .G3DREM

    .gcode

    Internal Storage

    8GB

    Operating Interface

    4.5” full color IPS touch screen

    Build Platform Leveling

    Semi-automated Leveling

     


    SOFTWARE

    Software Bundle

    Dremel DigiLab 3D Slicer - Based on Cura (Desktop); Included,

    Dremel Print Cloud - Based on 3DPrinterOS (Web-Based); Included,

    Simplify3D Software- Compatible; Sold Separately.

    CAD File Types

    STL

    OBJ

    Windows Requirements

    Windows (7, 8, 8.1, 10)

    MAC OS X Requirements

    Mac OS X (v10.9+)


    TEMPERATURE

    Extruder Maximum Temperature

    230°C

    Operating Temperature

    16-29°C


    ELECTRICAL

    Input Rating

    100-240V, 47-60Hz, 0.85-2.3Amps

    Connectivity

    Wifi, USB, Ethernet


    WEIGHT AND DIMENSIONS

     Weight

    19.8kg (43.6lb)

    Dimensions

    20.25 x 16 x 15.9 in


    WARRANTY

    One year warranty

    

    Each Dremel 3D40 FLEX EDU 3D Printer Bundle Includes

    - 3D40 FLEX 3D Printer

    - USB Flash Drive

    - 4-hour professional development course

    - (5) Flexible Build Plates

    - (4) Spools of PLA Filament (500g)

    - (1) Extra Build Sheet

    - Instruction Manual

    - Quick Start Guide

    - Unclog Tool

    - USB Cable

    - Power Cable

    Unsurpassed Reliability, Flexible Build Plate
    The new Dremel 3D40 3D printer, equipped with Dremel's clog resistant extruder and active filament monitoring, is engineered to run smoothly. Spend your time making, not repairing.

    The 3D40 also comes with a new, removable flexible build plate that makes print removal quick and easy. Using magnet and latches to hold the build plate in place, no tools are required. Ergonomic handles make build plate removal and flexing comfortable and easy. This model does not have a heated bed, so it is intended for printing Dremel PLA only.

     

     

     

    Technical Advancements
    Up to 30% Faster Printing
    New “draft mode” print profile in the slicing software prints parts up to 30% faster than the Dremel 3D40 at 340 micron layer height

    Up to 50 micron print resolution
    New “ultra high quality” print profile slicing software prints parts at 50 micron layer height, perfect for parts with intricate features and fine details.

    Certified Safety, Easy Connectivity
    WiFi Enabled for Cloud Printing
    Wifi-enabled and part of the Dremel Print Cloud for fast remote printing and monitoring.

    UL-Certified
    3D40 FLEX is UL-Certified, providing users peace of mind to focus on creativity - UL Standard: US-29813-M1-UL

     Calculated Reliability, Automatic Leveling
    Automatic 9 Point Calibration
    Automatic 9 point calibration before every print helps parts stick to the build plate and prevent clogs.

    Semi-Automated Leveling
    Guided 2-point semi automated leveling allows for effortless, accurate calibrations and easy set up. The touch screen shows you in real time how to precisely level the plate with just the turn of a knob.

     

     

     

      Technical Specs

      Printing Technology

      Fused Deposition Modeling

      Extruder

      Direct Drive

      Single Extruder

      Build Volume

      10 x 6 x 6.7in

      402 cubic inches

      Z-Layer Resolution

      100-300 microns

      Materials

      PLA

      Filament Diameter

      1.75mm (0.069 in)

      Nozzle Diameter

      0.4mm (0.014 in)

      Print File Type

      .G3DREM

      .gcode

      Internal Storage

      8GB

      Operating Interface

      4.5” full color IPS touch screen

      Build Platform Leveling

      Semi-automated Leveling

       


      SOFTWARE

      Software Bundle

      Dremel DigiLab 3D Slicer - Based on Cura (Desktop); Included,

      Dremel Print Cloud - Based on 3DPrinterOS (Web-Based); Included,

      Simplify3D Software- Compatible; Sold Separately.

      CAD File Types

      STL

      OBJ

      Windows Requirements

      Windows (7, 8, 8.1, 10)

      MAC OS X Requirements

      Mac OS X (v10.9+)


      TEMPERATURE

      Extruder Maximum Temperature

      230°C

      Operating Temperature

      16-29°C


      ELECTRICAL

      Input Rating

      100-240V, 47-60Hz, 0.85-2.3Amps

      Connectivity

      Wifi, USB, Ethernet


      WEIGHT AND DIMENSIONS

       Weight

      19.8kg (43.6lb)

      Dimensions

      20.25 x 16 x 15.9 in


      WARRANTY

      One year warranty

      Related Products

      Related Products

      Wanhao Duplicator I3 V2.1 - Ultimate 3D Printing Store
      Add to wishlist
      Quick View
      Wanhao Duplicator I3 V2.1 Wanhao Duplicator I3 V2.1

      $ 499.00

      Wanhao Duplicator 7 Plus - GEN 2 - Hood W/ UV Protection Window - Ultimate 3D Printing Store
      Add to wishlist
      Quick View
      Wanhao Duplicator 7 Plus - GEN 2 - Hood W/ UV Protection Window Wanhao Duplicator 7 Plus - GEN 2 - Hood W/ UV Protection Window

      $ 700.00

      Wanhao Duplicator 7 V1.5 - GEN 1 - Ultimate 3D Printing Store
      Add to wishlist
      Quick View
      Wanhao Duplicator 7 V1.5 - GEN 1 Wanhao Duplicator 7 V1.5 - GEN 1

      $ 700.00

      Phrozen Sonic - Worldwide Sales - Ultimate 3D Printing Store
      Add to wishlist
      Quick View
      Phrozen Sonic - Very Limited Stock Phrozen Sonic - Very Limited Stock

      $ 1,899.00

      Wanhao Duplicator I3 Plus - 1st Generation - Ultimate 3D Printing Store
      Add to wishlist
      Quick View
      Wanhao Duplicator I3 Plus - 1st Generation Wanhao Duplicator I3 Plus - 1st Generation

      $ 599.00

      Phrozen Transform - Pre-Order Round 2 - Worldwide Sales - Ultimate 3D Printing Store
      Sale
      Add to wishlist
      Quick View
      Phrozen Transform - Pre-Order - Worldwide Sales Phrozen Transform - Pre-Order - Worldwide Sales

      $ 2,500.00 $ 2,160.00

      Recently Viewed Products Recently Viewed Products

      Liquid error: Could not find asset snippets/zopim.liquid