Only works with 1.75mm Filament.
Developed by the inventor of Ninjaflex
High temperature 3D printer extruder upgrade for the Flexion extruder. Sold either as an upgrade for current Flexion owners, or as a bundle with the standard Flexion kit. Allows printing at temperatures up to 290°C to allow Nylon and Polycarbonate. Improved PLA performance. Fast hotend swapping. Works with all the same printers as the standard Flexion kits.
*Does not include stepper motor
High-temp bundle for dual extruder kits. Get the best of both worlds with one standard Flexion hotend, and one FlexionHT hotend. The finned mounting block replaces the standard block. Includes a variety of nozzles.
Full parts list:
FINNED mounting block
2x Tensioning arm with idler and cleaning brush (one right and one left)
2x Adjustment cam
2x Drive gear
1x Flexion barrel
1x FlexionHT barrel
2x Heater block
2x Silicone insulation for heater block
8 nozzles – 0.2, 0.3, 2x 0.4, 0.5, 0.6, 0.8, 1.0 mm orifice
2x Adapter shim to allow 6mm and 0.25″ heater cartridges
4 PTFE feed tubes
2 spare cleaning brushes
All mounting hardware
6mm and 7mm wrench for installing nozzles
“Flexion inside” quick-guide sticker
High-temperature 3D printer extruder upgrade or retrofit kit for common 3D printers. This upgrade allows printing of materials at up to 290°C. The barrel is designed in collaboration with Micro Swiss. The finned mounting block has several advantages:
- Better thermal performance
- Visibility of extruder (you can remove your stock heatsink – but continue to use the fan)
- Easy removal of the hotend without disassembling the motor and extruder (tool access between fan blades)
This kit requires you to disassemble your printer’s extruder and reinstall this upgrade. Instructions will be posted soon.
|Dimensions||3 x 4 x 1 in|
Flashforge Creator, Monoprice Dual, Wanhao 4S, Powerspec Ultra, and many others (see support pages)