Flexion Extruder for E3D Hotend Flexion Extruder for E3D Hotend

$ 129.00 $ 99.00
-
+
$ 99.00
Add to wishlist

Flexion extruder with an E3D mount. Comes with everything shown in the box:

  • Flexion extruder
  • E3D mounting block
  • PTFE tube that fits the E3D v6 hotend (plus a spare)
  • Clamp plate and mounting screws
  • Spare brush
  • Spare nozzles: 0.2, 0.3, 0.4, and 0.5mm

Does NOT include the stepper motor or hotend.

Those can be ordered here.

Product Description

3D printer extruder retrofit kit for E3D v6 hotend. This allows the use of the Flexion Extruder with the excellent E3D hotends – enabling precision extrusion of virtually every available filament from Nylon to ultra-flexible Shore 50A. This uses the same mounting hole pattern as the E3D extruder, and also has a couple mounting holes in the front (see drawing). It includes a PTFE tube cut to length for the E3D v6 hotends. So you’ll have all the same advantages of precision, supported, reliable filament driving with the flexibility to print at much higher temperatures. This kit is appropriate for RepRap and Lulzbot printers as well as the Prusa Mk2.

Includes:

  • Flexion extruder
  • E3D mounting block
  • Precision cut PTFE guide tube (plus a spare), and alignment collar.
  • Clamp plate and mounting screws
  • Spare brush
  • Spare nozzles: 0.2, 0.3, 0.4, and 0.5mm orifice

 

Additional Information

Weight 0.2 lbs
Includes

Mounting block and mounting hardware
Tensioning arm with idler and cleaning brush (one right and one left)
Adjustment cam
Drive gear
Nozzles: 0.2, 0.3, 0.4, and 0.5 mm orifice
2 PTFE feed tubes
Spare cleaning brushes
“Flexion inside” quick-guide sticker

Note: does not include stepper motor or hotend

    Flexion extruder with an E3D mount. Comes with everything shown in the box:

    • Flexion extruder
    • E3D mounting block
    • PTFE tube that fits the E3D v6 hotend (plus a spare)
    • Clamp plate and mounting screws
    • Spare brush
    • Spare nozzles: 0.2, 0.3, 0.4, and 0.5mm

    Does NOT include the stepper motor or hotend.

    Those can be ordered here.

    Product Description

    3D printer extruder retrofit kit for E3D v6 hotend. This allows the use of the Flexion Extruder with the excellent E3D hotends – enabling precision extrusion of virtually every available filament from Nylon to ultra-flexible Shore 50A. This uses the same mounting hole pattern as the E3D extruder, and also has a couple mounting holes in the front (see drawing). It includes a PTFE tube cut to length for the E3D v6 hotends. So you’ll have all the same advantages of precision, supported, reliable filament driving with the flexibility to print at much higher temperatures. This kit is appropriate for RepRap and Lulzbot printers as well as the Prusa Mk2.

    Includes:

    • Flexion extruder
    • E3D mounting block
    • Precision cut PTFE guide tube (plus a spare), and alignment collar.
    • Clamp plate and mounting screws
    • Spare brush
    • Spare nozzles: 0.2, 0.3, 0.4, and 0.5mm orifice

     

    Additional Information

    Weight 0.2 lbs
    Includes

    Mounting block and mounting hardware
    Tensioning arm with idler and cleaning brush (one right and one left)
    Adjustment cam
    Drive gear
    Nozzles: 0.2, 0.3, 0.4, and 0.5 mm orifice
    2 PTFE feed tubes
    Spare cleaning brushes
    “Flexion inside” quick-guide sticker

    Note: does not include stepper motor or hotend

      Recently Viewed Products Recently Viewed Products