iglide® J260-PF - 1.75mm - 750g iglide® J260-PF - 1.75mm - 750g

$ 107.57

Type
-
+
$ 107.57
Add to wishlist

iglide® filament for 3D printing

Our printed plain bearings made from the Tribo-Filament iglide® J260-PF are equally as wear resistant as our injection-molded parts from the same material. This has been demonstrated by extensive series of tests. The iglide® 3D print filaments also have lower coefficients of friction than conventional 3D print materials. This makes iglide® Tribo-Filaments the only 3D printing materials to also offer impressive performance in moving applications. You can directly install printed parts such as plain bearings or worm gears and put them to industrial use – in the prototype phase or during serial production.

Typical application areas

- Prototype constructions

- Small batches

- Construction tests

Good liquid media resistance

Wear-resistant, especially when used with plastic shafts

Flexural strength: 41 / 13 MPa

iglide® filament for 3D printing

Our printed plain bearings made from the Tribo-Filament iglide® J260-PF are equally as wear resistant as our injection-molded parts from the same material. This has been demonstrated by extensive series of tests. The iglide® 3D print filaments also have lower coefficients of friction than conventional 3D print materials. This makes iglide® Tribo-Filaments the only 3D printing materials to also offer impressive performance in moving applications. You can directly install printed parts such as plain bearings or worm gears and put them to industrial use – in the prototype phase or during serial production.

Typical application areas

- Prototype constructions

- Small batches

- Construction tests

Good liquid media resistance

Wear-resistant, especially when used with plastic shafts

Flexural strength: 41 / 13 MPa

Recently Viewed Products Recently Viewed Products

Liquid error: Could not find asset snippets/zopim.liquid