Phrozen Engineering Series: TR250 High Temp Resin (LCD UV Curing Resin) for Engineering, Industrial Use, Jewelry and Dental Application, Deep Gray (500g) Phrozen Engineering Series: TR250 High Temp Resin (LCD UV Curing Resin) for Engineering, Industrial Use, Jewelry and Dental Application, Deep Gray (500g)

$ 49.95

-
+
$ 49.95
Add to wishlist

Specification & Performance

Weight: 500g per bottle

Phrozen TR250, is an engineering grade resin, with excellent mechanical characteristics, and thermal resilience that allows it function normally at temperatures up to 200 degrees Celsius.

XY Resolution: 0.047 mm

Layer Height / Parameter: 15 sec @ 50 um, Delay 3

Way to Clean Printed Part: Use alcohol spray to clean models and dry it by air gun. Do not immerse printed part into alcohol over 30 sec.

Compatible Printer: Phrozen Shuffle, Shuffle XL, Make ParaLED, Make XL ParaLED, Phrozen 1.5

Application: Rubber Mold for Jewelry, Fine Details GK Kit, Heat Resistance Application

 

Phrozen TR250 engineering dark gray resin profiles - 30um CLICK HERE 

Phrozen TR250 engineering dark gray resin profiles - 50um CLICK HERE

Phrozen TR250 engineering dark gray resin profiles - 50um XL CLICK HERE

Key Performance:

- Viscosity: 61 mPa.S (25C)

- Density: 1.10 g / cm3

- Tensile Stress (Break): 68 MPa

- Elongation: 8.5%

- Tensile Modulus: 1050 MPa

- Hardness: Shore 80D

- Heat Deflection Temperature @0.45MPa: > 150C

 

 

 

 

Safety Recommendation

​​- Do your best to wear glove, goggles, long sleeves shirt during usage of resin. Wash hands after every operation.

​​- DO NOT swallow resin. Go to hospital if you do it.

​​- Avoid eye contact by resin. Rinse with water and go to hospital if resin contacts eyes.

​​- Resin might cause slight skin irritation. Stop using it if allergy occurred.

- Resin smells. We strongly suggest you to use it under ventilated condition.

- Keep resin in room temperature(15 - 35 Celsius) and dry condition.

- Keep resin away from kid.

 

 

About Resin Operation

- Avoid sun light exposure.

- After printing, stored used resin in closed and opaque bottle. ​​

- DO NOT mix fresh resin and used resin.

- Shake or stir resin properly to avoid pigment separation.

​​- DO NOT dump resin. Please cured resin and treat/recycle it as general plastics garbage.

 

 

 

 

 

Specification & Performance

Weight: 500g per bottle

Phrozen TR250, is an engineering grade resin, with excellent mechanical characteristics, and thermal resilience that allows it function normally at temperatures up to 200 degrees Celsius.

XY Resolution: 0.047 mm

Layer Height / Parameter: 15 sec @ 50 um, Delay 3

Way to Clean Printed Part: Use alcohol spray to clean models and dry it by air gun. Do not immerse printed part into alcohol over 30 sec.

Compatible Printer: Phrozen Shuffle, Shuffle XL, Make ParaLED, Make XL ParaLED, Phrozen 1.5

Application: Rubber Mold for Jewelry, Fine Details GK Kit, Heat Resistance Application

 

Phrozen TR250 engineering dark gray resin profiles - 30um CLICK HERE 

Phrozen TR250 engineering dark gray resin profiles - 50um CLICK HERE

Phrozen TR250 engineering dark gray resin profiles - 50um XL CLICK HERE

Key Performance:

- Viscosity: 61 mPa.S (25C)

- Density: 1.10 g / cm3

- Tensile Stress (Break): 68 MPa

- Elongation: 8.5%

- Tensile Modulus: 1050 MPa

- Hardness: Shore 80D

- Heat Deflection Temperature @0.45MPa: > 150C

 

 

 

 

Safety Recommendation

​​- Do your best to wear glove, goggles, long sleeves shirt during usage of resin. Wash hands after every operation.

​​- DO NOT swallow resin. Go to hospital if you do it.

​​- Avoid eye contact by resin. Rinse with water and go to hospital if resin contacts eyes.

​​- Resin might cause slight skin irritation. Stop using it if allergy occurred.

- Resin smells. We strongly suggest you to use it under ventilated condition.

- Keep resin in room temperature(15 - 35 Celsius) and dry condition.

- Keep resin away from kid.

 

 

About Resin Operation

- Avoid sun light exposure.

- After printing, stored used resin in closed and opaque bottle. ​​

- DO NOT mix fresh resin and used resin.

- Shake or stir resin properly to avoid pigment separation.

​​- DO NOT dump resin. Please cured resin and treat/recycle it as general plastics garbage.

 

 

 

 

 

Recently Viewed Products Recently Viewed Products