XStrand™ GF30-PP - 2.85MM - 2.2KG - Black XStrand™ GF30-PP - 2.85MM - 2.2KG - Black

$ 350.00 $ 315.00
-
+
$ 315.00
Add to wishlist

GF-30 PP:

Features and Benefits:

- Materials designed for functional prototyping and industrial applications
- Engineered reinforced plastics
- Very stiff and strong
- Large operational temperature range: -20 ˚C to 120 ˚C
- Good chemical and UV resistance
- Excellent layer adhesion and reduced warping effect compare to neat materials

 

 Printing Recommendations:

- XSTRAND™ filaments are designed to be compatible with most of open fused filament fabrication 3D printers available on the market.


- Hardened steel nozzle is highly recommended to print XSTRAND™. When melted, XSTRAND™ filament can be abrasive due to its glass reinforcement. Using hardened steel nozzles and extruder driving wheels is advised. Hardened steel nozzles can be found at

https://www.p3-d.com/collections/duraplat-3d-extruder-nozzles

or

https://www.3dxtech.com/e3dv6-hercules-a2-hardened-steel-nozzle/


Bed components are recommended as follows:
If printing on a glass bed use one of the following:
- Use reinforced strapping packaging tape on the bed (e.g. Scotch Extreme Tape), with bed temperature around 30-50˚C
- or Use Wolfbite Ultra for polypropylene from Airwolf
- A high-density polyethylene (HDPE) plate as printing surface, instead of glass plate for example, is highly recommended. Bed temperature at 30-50˚C. It’s better if the HDPE bed is thicker (thickness of 1/4’’ to 3/8’’). First layer width of 130% and height of 75% are recommended too.
- Or use a perforated bed (such as the one on Zortrax machines). For Zortrax machines, use default ABS setting.
- For large flat surface, a raft is required to reduce warping. 5-8mm raft offset and airgap 0.16 – 0.18 are recommended.
- Nozzle temperature: 220 – 280 ̊C
- Bed temperature: 80-110 ̊C
- Nozzle diameter: >0.4mm

    Case studies:

  • Rossignol https://www.youtube.com/watch?v=3FsfPWo7Ngw

  • Seair: https://youtu.be/Pg-7HgO7ZfQ

  •  

      About Owens Corning:

      - A world leader in glass fiber composite
      - More than 500 researchers in five R&D centers
      - $5.7 billion sales (2016)
      - 17,000 employees in 33 countries

           

           

           

           

           


          GF-30 PP:

          Features and Benefits:

          - Materials designed for functional prototyping and industrial applications
          - Engineered reinforced plastics
          - Very stiff and strong
          - Large operational temperature range: -20 ˚C to 120 ˚C
          - Good chemical and UV resistance
          - Excellent layer adhesion and reduced warping effect compare to neat materials

           

           Printing Recommendations:

          - XSTRAND™ filaments are designed to be compatible with most of open fused filament fabrication 3D printers available on the market.


          - Hardened steel nozzle is highly recommended to print XSTRAND™. When melted, XSTRAND™ filament can be abrasive due to its glass reinforcement. Using hardened steel nozzles and extruder driving wheels is advised. Hardened steel nozzles can be found at

          https://www.p3-d.com/collections/duraplat-3d-extruder-nozzles

          or

          https://www.3dxtech.com/e3dv6-hercules-a2-hardened-steel-nozzle/


          Bed components are recommended as follows:
          If printing on a glass bed use one of the following:
          - Use reinforced strapping packaging tape on the bed (e.g. Scotch Extreme Tape), with bed temperature around 30-50˚C
          - or Use Wolfbite Ultra for polypropylene from Airwolf
          - A high-density polyethylene (HDPE) plate as printing surface, instead of glass plate for example, is highly recommended. Bed temperature at 30-50˚C. It’s better if the HDPE bed is thicker (thickness of 1/4’’ to 3/8’’). First layer width of 130% and height of 75% are recommended too.
          - Or use a perforated bed (such as the one on Zortrax machines). For Zortrax machines, use default ABS setting.
          - For large flat surface, a raft is required to reduce warping. 5-8mm raft offset and airgap 0.16 – 0.18 are recommended.
          - Nozzle temperature: 220 – 280 ̊C
          - Bed temperature: 80-110 ̊C
          - Nozzle diameter: >0.4mm

            Case studies:

          • Rossignol https://www.youtube.com/watch?v=3FsfPWo7Ngw

          • Seair: https://youtu.be/Pg-7HgO7ZfQ

          •  

              About Owens Corning:

              - A world leader in glass fiber composite
              - More than 500 researchers in five R&D centers
              - $5.7 billion sales (2016)
              - 17,000 employees in 33 countries

                   

                   

                   

                   

                   

                  Recently Viewed Products Recently Viewed Products