Phrozen Standard Resin: Beige (LCD UV Curing Resin) for Prototyping General Models and Figures, Applicable to 3D Printer (500g) Phrozen Standard Resin: Beige (LCD UV Curing Resin) for Prototyping General Models and Figures, Applicable to 3D Printer (500g)

$ 49.95

-
+
$ 49.95
Add to wishlist

Phrozen Standard Resin: Eliminate Your Printing Barriers, Just Print It !

Specification & Performance

Weight: 500g per bottle
XY Resolution: 0.047 mm
Layer Height / Parameter: 13 sec @ 50 um, Delay 3
Way to Clean Printed Part: Use alcohol spray to clean models and dry it by air gun. Do not immerse printed part into alcohol over 30 sec.
Compatible Printer: Phrozen Shuffle, Shuffle XL, Make ParaLED, Make XL ParaLED, Phrozen 1.5
Application: Prototyping
Key Performance:
Viscosity: 530 cps (25C)
Density: 1.14 g / cm3
Tensile Stress (Break): 51 MPa
Elongation: 6.7%
Tensile Modulus: 980 MPa
Hardness: Shore 72D
Heat Deflection Temperature @0.45MPa: 123C
About Resin Operation

Avoid sun light exposure.
After printing, stored used resin in closed and opaque bottle. ​​
DO NOT mix fresh resin and used resin.
Shake or stir resin properly to avoid pigment separation.
​​DO NOT dump resin. Please cured resin and treat/recycle it as general plastics garbage.

Safety Recommendation

​​- Do your best to wear glove, goggles, long sleeves shirt during usage of resin. Wash hands after every operation.
​​- DO NOT swallow resin. Go to hospital if swallowed.
​​- Avoid eye contact by resin. Rinse with water and go to hospital if resin contacts eyes.
​​- Resin might cause slight skin irritation. Stop using it if allergy occurred.
- Resin smells. We strongly suggest you to use it under ventilated condition.
- Keep resin in room temperature(15 - 35 Celsius) and dry condition.
- Keep resin away from children.

Phrozen Standard Resin: Eliminate Your Printing Barriers, Just Print It !

Specification & Performance

Weight: 500g per bottle
XY Resolution: 0.047 mm
Layer Height / Parameter: 13 sec @ 50 um, Delay 3
Way to Clean Printed Part: Use alcohol spray to clean models and dry it by air gun. Do not immerse printed part into alcohol over 30 sec.
Compatible Printer: Phrozen Shuffle, Shuffle XL, Make ParaLED, Make XL ParaLED, Phrozen 1.5
Application: Prototyping
Key Performance:
Viscosity: 530 cps (25C)
Density: 1.14 g / cm3
Tensile Stress (Break): 51 MPa
Elongation: 6.7%
Tensile Modulus: 980 MPa
Hardness: Shore 72D
Heat Deflection Temperature @0.45MPa: 123C
About Resin Operation

Avoid sun light exposure.
After printing, stored used resin in closed and opaque bottle. ​​
DO NOT mix fresh resin and used resin.
Shake or stir resin properly to avoid pigment separation.
​​DO NOT dump resin. Please cured resin and treat/recycle it as general plastics garbage.

Safety Recommendation

​​- Do your best to wear glove, goggles, long sleeves shirt during usage of resin. Wash hands after every operation.
​​- DO NOT swallow resin. Go to hospital if swallowed.
​​- Avoid eye contact by resin. Rinse with water and go to hospital if resin contacts eyes.
​​- Resin might cause slight skin irritation. Stop using it if allergy occurred.
- Resin smells. We strongly suggest you to use it under ventilated condition.
- Keep resin in room temperature(15 - 35 Celsius) and dry condition.
- Keep resin away from children.

Recently Viewed Products Recently Viewed Products