Phrozen Functional Resin: Beige Flex (LCD UV Curing Resin) for Prototyping, Applicable to 3D Printer (500g) Phrozen Functional Resin: Beige Flex (LCD UV Curing Resin) for Prototyping, Applicable to 3D Printer (500g)

$ 49.95

-
+
$ 49.95
Add to wishlist

Phrozen Functional Resin: Explore Possibility for Engineering !

Specification & Performance

Weight: 500g per bottle
XY Resolution: 0.047 mm
Layer Height / Parameter: 10 sec @ 50 um, Delay 3
Way to Clean Printed Part: Use alcohol spray to clean models and dry it by air gun. Do not immerse printed part into alcohol over 30 sec.
Compatible Printer: Phrozen Shuffle, Shuffle XL, Make ParaLED, Make XL ParaLED, Phrozen 1.5
Application: Prototyping
Key Performance: 
Viscosity: 545 cps (25C)
Density: 1.19 g / cm3
Tensile Stress (Break): 40 MPa
Elongation: 50-60 %
Tensile Modulus: 192 MPa
Hardness: Shore 65D
Heat Deflection Temperature @0.45MPa: 100C

About Resin Operation
- Avoid sun light exposure.
- After printing, stored used resin in closed and opaque bottle. ​​
- DO NOT mix fresh resin and used resin. 
- Shake or stir resin properly to avoid pigment separation.
​​- DO NOT dump resin. Please cured resin and treat/recycle it as general plastics garbage.


Safety Recommendation
​​
- Do your best to wear glove, goggles, long sleeves shirt during usage of resin. Wash hands after every operation.
​​- DO NOT swallow resin. Go to hospital if you do it.
​​- Avoid eye contact by resin. Rinse with water and go to hospital if resin contacts eyes.
​​- Resin might cause slight skin irritation. Stop using it if allergy occurred.
- Resin smells. We strongly suggest you to use it under ventilated condition.
- Keep resin in room temperature(15 - 35 Celsius) and dry condition.
- Keep resin away from kids

 

 

Phrozen Functional Resin: Explore Possibility for Engineering !

Specification & Performance

Weight: 500g per bottle
XY Resolution: 0.047 mm
Layer Height / Parameter: 10 sec @ 50 um, Delay 3
Way to Clean Printed Part: Use alcohol spray to clean models and dry it by air gun. Do not immerse printed part into alcohol over 30 sec.
Compatible Printer: Phrozen Shuffle, Shuffle XL, Make ParaLED, Make XL ParaLED, Phrozen 1.5
Application: Prototyping
Key Performance: 
Viscosity: 545 cps (25C)
Density: 1.19 g / cm3
Tensile Stress (Break): 40 MPa
Elongation: 50-60 %
Tensile Modulus: 192 MPa
Hardness: Shore 65D
Heat Deflection Temperature @0.45MPa: 100C

About Resin Operation
- Avoid sun light exposure.
- After printing, stored used resin in closed and opaque bottle. ​​
- DO NOT mix fresh resin and used resin. 
- Shake or stir resin properly to avoid pigment separation.
​​- DO NOT dump resin. Please cured resin and treat/recycle it as general plastics garbage.


Safety Recommendation
​​
- Do your best to wear glove, goggles, long sleeves shirt during usage of resin. Wash hands after every operation.
​​- DO NOT swallow resin. Go to hospital if you do it.
​​- Avoid eye contact by resin. Rinse with water and go to hospital if resin contacts eyes.
​​- Resin might cause slight skin irritation. Stop using it if allergy occurred.
- Resin smells. We strongly suggest you to use it under ventilated condition.
- Keep resin in room temperature(15 - 35 Celsius) and dry condition.
- Keep resin away from kids

 

 

Recently Viewed Products Recently Viewed Products