TH Board Set V9 (Dual Red Laser) - X1 Series
Overview
A set of circuit boards installed on the printer's toolhead.
Important to know
- There is no difference in functionality between the Dual Red Laser version and the Single Red Laser version.
- The Single Red Laser TH board is discontinued and has been replaced by the Dual Red Laser TH board.
- The Dual Red Laser TH board works with the Dual Red Laser LIDAR.
Installation:
Before ordering the TH board or micro lidar for X1C/X1, please determine their versions to avoid the wrong version, which results in compatibility issues.
- If the Micro Lidar SN starts with 00ExxB, it means that the lidar is a dual red version, and the TH board should also be a dual red version with a serial number SN starting with 003xxC, 003xxD, or 003xxY.
- If the Micro Lidar SN starts with 00ExxA, it means that the lidar is a single red version, and the TH board should also be a single red version with a serial number SN starting with 003xxA or 003xxB.
In The Box
- 1 X TH Board Set V9 (Dual Red Laser)
- 1 X TH Board FPC Cable
- 1 X Extruder TH Board V9
- 4 X M1_6-4
- 1 X Glue
Compatibility:
X1 and X1C (not for X1E)
