QIDI Q1 Pro 3D Printer
Overview:
Independent Dual Z Motors
Active Chamber Heating
New Tri-metal Hot End
Temperature Control
Standard feature of the QIDI Q1 Pro is an active chamber heating. This reduces warping especially for warp-prone filaments such as ABS, PA, PC, etc. This also improves layer bonding and print quality.
Maximum 350°C Nozzle Temp.
Unlock High-temp filament such as PAHT-CF, PET-CF, PA12-CF, ABS-GF25, PC/ABS-FR etc.
Enhanced Mechanical Properties
Independent Dual Z Motors with no belt
Automatic tilt leveling resulting in higher precision and stability
Dual Sensor Auto Bed Leveling
Precise first layer every time
Auto measure Z-offset
The auto measure Z-offset removes the need for paper leveling for reference
Comprehensive Filament Detection System
Filament Runout Detection
Filament Tangle Detection
High Speed, Precision and Stablility
Reduced power consumption and heat generation
Reduced vibration by utilizing Spreadcycle technology
Lightweight CoreXY for ultra fast acceleration
Built with Reliability in Mind
Full metal frame structure with a metal bottom reinforcement for stability
Klipper 64-bit Processors
Large memory capacity with 32G-EMMC
150M Wi-Fi 6 High-speed transport
1080P Camera
Timelapse supported and easy remote monitoring
What's in the Box?
Specifications
| Applicable to | Q1 Pro |
| Print Size (W*D*H): | 245 x 245 x 240mm |
| Printer Dimensions: | 477 x 467 x 489mm |
| XY Structure: | CoreXY |
| X/Y Axis: | 10mm/8mm High hardness linear hollow steel shafts belt tensioned automatically |
| Z Axis: | Dual Independent Lead Screw Motors |
| Print Head Temperature: | ≤ 350℃ |
| Extruder: | Direct Extruder and Hardened Steel Gears |
| Hot End: | Ceramic Plate Heating Hot End |
| Nozzle: | Bimetal Nozzle |
| Filament Diameter: | 1.75mm |
| Max Speed of Tool Head: | 600mm/s |
| Operating System: | Windows, MacOS, Linux |
| Recommended Filament: | PLA, ABS, ASA, PETG |
| Compatible Filament: | TPU,PA, PC, Carbon/ Glass Fiber Reinforced Polymer |
| Voltage: | 100-240 VAC, 50/60Hz |
| Camera: | Low Framerate Camera (Up to 1080P) Timelapse Supported |
| Wifi Module: | 150M 2.4G |
| File Formats for Slicing: | STL, OBJ, 3MF,STEP,STP |