Monocure 3D Standard Model Dental resin features high dimensional stability, a gypsum-like texture, a unique matte finish and an opaque colour for 3D printed dental model processing. The Standard formula was developed for higher powered LED Projector type DLP 3D printers. This resin allows for highly accurate printing in the range of 100 to 25 microns. The surface finish is very smooth and hard, which helps create precise angles, optimising the print quality, and reducing the rate of print failures.
Applications
- Models of teeth
- Models of gums
- Prototypes of dentures
- Prototypes of crowns
- Prototypes of bridges
Advantages
Suitable for high accuracy dental model printing
Unique Gypsum like texture
Easy on the eyes formula - high in opaqueness and a matte finish
A hard surface finish of 80 Shore D after post-curing
Works with DLP LED/LCD 3D printers
Rapid curing properties for fast printing
Short post curing time required
Compatible Printers
- Uniz Slash
- MoonRay
- Asiga UV-Max
- Phrozen Make
- B9 Creator
- Flashforge Hunter
- XYZ Nobel
- Kudo Titan
- Any high powered, bottom up, LED projector 3D Printer.
Monocure 3D DENTAL model resin is not recommended for intraoral use.
Description Technical Data SDS
Application: Dental Modeling, General Prototyping
Formula: Standard
Viscosity: 300-500cps @ 25°C (Brookfield RVT)
Odour: Negligible Characteristics
Hardness: 80 Shore D
Exposure energy: 19 mJ / cm 2
Resolution: 0.02 - 0.085mm
Tensile strength: 47 Mpa
Elongation at break: 6%
Shrinkage: <0.1%
Volume: 1250ml
Weight: 1.4kgs
Please store Monocure 3D Model Dental Resin in a dark, cool place out of direct sunlight.
