Overview
The LulzBot TAZ Pro XT gives you a single extrusion 2.85mm tool head that can put down big layers in a tall 23" build area with superior 3D print quality, and easy, professional results.
-
Single Extrusion HS+ Tool Head
-
2.85mm extruder featuring a hardened steel nozzle and extruder hobb capable of printing high-strength composite polymers like PA-CF and carbon-fiber filled Nylon along with more traditional materials like ABS, PETg, PLA, and NinjaFlex.
-
Large 280 x 280 x 586 mm build volume with heated build plate.
-
Automated X/Y/Z offset calibration, nozzle wiping, and self-leveling features.
-
Enhanced 32-bit electronics for greater processing power, more memory, and quiet operation.
-
Filament runout detection.
-
Cable chain and reinforced electrical connectors for long wire harness life.
-
5" full color touch screen.
-
Made in USA
Printing
Print Technology | Fused Filament Fabrication |
Print Volume Dimensions | 280 mm x 280 mm x 586 mm (11.02 in x 11.02 in x 23.07 in) |
Print Volume | 45,942 cm³ (2,803.58 in³) |
Ambient Operating Temperature | From 5°C to 45°C (41°F to 113°F) |
Operating Footprint | 83.2 cm x 71 cm x 52 cm (32.76 in x 28 in x 20.47 in) |
Maximum Travel Speed | 200 mm/sec |
Leveling | Automatic Compensation |
Calibration | Automatic X/Y/Z offset calibration |
Connectivity | USB Serial or USB Flash Drive with Included 4gb Flash Drive |
Included Tool Head | HS+ Tool Head | 2.85 mm | Hardened Steel | 1.2 mm |
Extruder/Hot End | E3D Titan Aero |
Nozzle Diameter | 1.20 mm |
Nozzle Material | Hardened Steel |
Nozzle Temperature | Up to 290°C (554°F) |
Print Surface | Modular Heated Borosilicate Glass/PEI |
Maximum Print Bed Temperature | Up to 120°C (248°F) |
Print Bed Heat Up Time | From 18°C to 100°C (64°F to 212°F) in 10 minutes, 45 seconds |
Layer Resolution | 0.6mm - 1.0mm (0.027"-0.039") |
Calculated XYZ positional resolution | 10, 10, <1 micron |
Materials
Filament Diameter | 2.85 mm |
Supported Materials | Open filament system compatible with PLA, ABS, Nylon, Polycarbonate, Carbon Fiber Reinforced Blends, TPU 85A & 95A (Flexible), PETG, PETT, Copolyester, PVB (Polycast), PVA, HIPS, and many more 3rd party filaments. |
Physical Dimensions
Boxed Unit Weight | 20.86 kg (46 lbs) |
Unit Weight | 16.78 kg (37 lbs) without filament spool |
Boxed Dimensions | 88.9 cm x 30.48 cm x 66.04 cm (35 in x 12 in x 26 in) |
Dimensions with 1kg Filament Spool | 83 cm x 71 cm x 52 cm (32.67 in x 28 in x 20.47 in) |
Software
Operating System Compatibility | GNU/Linux, Mac, Windows |
Recommended Software | Cura LulzBot Edition Version 3.2 or newer |
Firmware | Marlin |
Supported File Types | .stl, .obj, .x3d, .3mf, .png, .jpg |
Electrical
Power Requirements | 100VAC-240VAC, 50Hz-60Hz, 3.2A max |
Output | 24VDC, 500 watts, 21 amps |
Power Supply | PMC-24V150W1AA |
Power Cable | IEC cord, C13 to region-specific connector |