Jabil - ABS 1400 LW 1KG - Black

$ 25.99
$ 25.99
$ 51.99
Sold out
Quantity must be 1 or more

Jabil - ABS 1400 LW - Black

Description

Jabil’s ABS 1400 LW is easy to print with balanced properties that consistently lay flat. It has minimal warping when printed with 100% infill in a non-heated chamber system. It also maintains good layer-to-layer adhesion from the bottom of the build to the top, with excellent surface appearance. The ABS 1400 LW is great for applications where the properties of ABS are wanted, but low warp is required.

Jabil’s ABS 1400 LW is more durable and heat resistant to parts printed with PLA and can be used with Direct Drive or Bowden Tube 3D printers. The material also can stand up to several finishing processes such as vapor polish, sanding, dyeing, painting, and adding a gloss finish. The 1400 LW material is a great option for prototypes and parts that require the ability to stand up to a lot of wear and tear, particularly given its multiple finishing processes.

Applications

  • Applications where properties of ABS are wanted, but low warp is required
  • Prototypes and parts that require enhanced durability
  • Brackets
  • Housings
  • Jig, fixtures, and tooling to aid in manufacturing
    • Automotive
    • Aerospace
    • General Manufacturing

Advantages

    • Good layer-to-layer adhesion.
    • More durable and heat resistant than PLA.
    • Stiffer than most ABS filament.
    • Reduced CLTE (continuous level, linear thermal expansion)
    • Improved Deminsional Stability
    • Stands up to finishing processes such as vapor polish, sanding, dyeing, painting, and adding a gloss finish.
    • Good chemical resistance to most fluids.

Specifications

Printing Temperature:

The optimal printing range is 275° – 295°C

Bed Temperature:

The hotter the better, up to 110°C

Printing Speed:

Base printing speed of 60 mm/s
Infill speed of 45 mm/s
Wall speed of 40 mm/s
Initial layer speed of 20 mm/s

Cooling:

For best results, use a cooling fan speed of 5%. Some printers will run best with no cooling fan. Make sure to have the fan off for the first layer.

Diameter(s):

1.75mm and 2.85mm

Color(s):

Bed Adhesion:

Suitable adhesion can be obtained with PVA-based glue stick on a glass bed. A brim should be used. If the printer being used is unable to maintain the recommended bed temperature, an ABS/acetone slurry or a PEI sheet may be used to help adhesion.

Other Tips:

If there are burn marks on the parts while printing, reduce the temperature by 5°C and make sure to clean off the nozzle. Turn off combing settings if using Cura.
For strong parts, print at the higher end of the recommended temperature range. It may also help to reduce the print speed, turn the fan completely off, reduce the layer height, or increase the infill/ skin overlap.

Information Sheets

Compare Materials

Jabil Powders

View Powders
UTS (Mpa)
Orientation		 Tensile Modulus
(Mpa) Orientation		 EaB (%)
Orientation		 Unnotched Impact Energy
(J/m) Orientation		 Notched Impact Energy
(J/m) Orientation		 Melt
Temperature (°C)
Material XY Z XY Z XY z XY XY
PA 4000 46 37 1790 1130 34 12 1010 48 182
PA 4050 GB 44 46 3390 3380 6 5 221 33 181
PK 5000 53 51 1305 1349 41 21 1241 83 197

Jabil Filament

View Filaments
UTS (MPa)
Orientation		 Tensile Modulus
(MPa) Orientation		 EaB (%)
Orientation		 Unnotched Impact Energy
(J/m) Orientation		 Notched Impact Energy
(J/m) Orientation		 Melt
Temperature (°C)
Material XY XY XY XY XY XY
ABS 1400 LW 35 2730 3 235 39 N/A
PA 0600 49 2660 5 822 69 188
PA 4035 CF 66 6000 4 557 191 180
PA 4500 56 1930 > 100 830 62 190
PA 4535 CF 88 10600 3 525 125 190
PC 1500 FR 61 2210 6 850 51 N/A
PETg 45 1655 24 N/A N/A N/A
PETg 0800 ESD 39 1895 8 416 49 N/A
PLA 3100 47 3240 6 207 31 155
TPE SEBS 1300 85A 6 19 900 N/A N/A 163
TPE SEBS 1300 95A 11 93 780 N/A N/A 165
TPU 90A 19 13 4540 N/A N/A 220
Go to full site